Cab FARB fit on rear of s2 coupe ?

[Gazmitchell]

As above are these the same and do they fit ? Thanks

[Rusty]

Should do. Needs to be the later B4 bar that has drop links. Measure the diameter, it'll be 24mm or 25mm, like mine.

[Gazmitchell]

Should do. Needs to be the later B4 bar that has drop links. Measure the diameter, it'll be 24mm or 25mm, like mine.

Cheers Andy , just there's one on ebay so didn't wanna go after it if no good .

[Rusty]

If it's the 2.8 cab one, that'll work

[sam80quattro]

Can't you use a early b3 anti roll bar with the short bent links into the bottom arms?

[dubmanted]

I have a 2.8 cab FARB here attached to a good subframe

[GazzaG60]

i got a 16v Quattro front bar here. its basically same as s2 bar.

[Rusty]

It's all covered here http://www.s2forum.com/forum/showthread.php?t=20175

[Gazmitchell]

It's an 1.8 cab one ... ? Only paid £20 for it but didn't wanna spend loads on Rarb if I can help it as the rear subframe swap job is expanding as I go lol .. Now inc fuel lines it'll be a an underbody resto and paint the way it's going !!!