Headlight Dust Caps

[ivooo]

Does anyone have headlight dust caps. Left side. 1996 Cab 2.0iIMG_8753.jpg

[B5NUT]

I have a cap from non-ellipsoid headlight, cover postage and you can have it.

[ivooo]

Can i see it first?
Thanks

[B5NUT]

Can post a picture later, but are your lights ellipsoid or not? as if they are ellipsoid then it won't fit.

[ivooo]

They are ellipsoid :/

[newsh]

Can post a picture later, but are your lights ellipsoid or not? as if they are ellipsoid then it won't fit.

Was there a spare ellipsoid back cap in that box of stuff I sent you? If not I should have one here somewhere.

[B5NUT]

Was there a spare ellipsoid back cap in that box of stuff I sent you? If not I should have one here somewhere.

In the box there were three caps, but from your message they were 3b non-ellipsoid parts and looking at etka there are different parts number for the standard caps v ellipsoid caps. There are no part numbers printed on the caps but I can check them tomorrow on my lights and if one fits then I can post one off.

[newsh]

In the box there were three caps, but from your message they were 3b non-ellipsoid parts and looking at etka there are different parts number for the standard caps v ellipsoid caps. There are no part numbers printed on the caps but I can check them tomorrow on my lights and if one fits then I can post one off.

Ah ok, I think I might have included some bits from a broken ellipsoid.. I’ll look in the shed anyway

[newsh]

Here you go

Previously cherished from the cabby that got crashed so a couple of scratches.

[newsh]

They are ellipsoid :/

See above
PM me your address and I’ll post it.

[B5NUT]

I checked the caps you sent me today (Was out and about yesterday) Both larger caps you sent were non-ellipsoid. If anyone needs a cap for non-ellipsoid lights PM as I have 2 and are free to a good home!

Picture shows non-ellipsoid v ellipsoid(top cap)
1-cap.jpg