hi i am doing a motor swap on a 95 audi a6 quattro it was a 2.8 gas . this is a US car did the c4 body ever come factory with a 1.9 tdi ? i am using a 1z from a 96 passat if it was a option i would like to see pics of under the hood. i cant find motor mounts. i would like to buy mounts if possible .2.0 gas mounts dont fit . thanks in advance dave
c4 a6 1.9tdi swap
Collapse
X
-
Tags: None
-
1.9 tdi in a6
yes i changed 5th gear this car was also an auto i swapped in the 5 speed &rear diffComment
-
1.9 tdi in a6
yes i changed 5th gear in the trans i also had to change from auto trans to manual any chance anyone would have motor mounts/ brackets for one ?Comment
-
you may use the audi 80 enginemount to the block...audi 80 from 88 and newer; thei had the engine fastend like a 5 pot..to the chassi, not on the frontend subframe...Comment
-
engine mont audi 100/ a6/s6 with 1,8/2,0liter 4pot 4a0 199 307a and 4a0 199 308 may fit the 1z and ahu or similar
the same for audi 80/ smallchassi 893 199 307a and 893 199 308 ; but oilfilterhousing may be different angel or fitment to the block( there are at least 5 differense of these....
some of the trannys does have 2 boltpattern, so 4 or 5 or any engine will fit in..
and the 1z or similar may be tuned easily to 140 hp-200hp or more...www.tdiforum.com i think
good luck with the projectComment
-
1.9 tdi in c4 a6
thanks guys. i have a couple of 80 4 cyl out back i will look at the mounts on them. i think in us all 4 cyl cars mount to subframe but maybe not. i think i have all the wiring done the mounts are next i see from reading the forums some a6/100 dont have cruise or power windows i have never seen a audi without power windows/ cruise a/c they are all fully loaded . thanks daveComment
-
i couldnt find any mounts to fit so i made a set the car seems to have ok power &great economy i will post pics daveComment
-
audi a6 tdi swap
here is some picsComment
Comment