c4 a6 1.9tdi swap

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • turboaudis4
    S2Forum Buff
    • May 2010
    • 25
    • Country: United States

    #1

    c4 a6 1.9tdi swap

    hi i am doing a motor swap on a 95 audi a6 quattro it was a 2.8 gas . this is a US car did the c4 body ever come factory with a 1.9 tdi ? i am using a 1z from a 96 passat if it was a option i would like to see pics of under the hood. i cant find motor mounts. i would like to buy mounts if possible .2.0 gas mounts dont fit . thanks in advance dave
  • spink
    S2Forum Freak
    • Jul 2003
    • 4382
    • Country: England

    #2
    yes quite rare though,they came with an 'ahu' 1.9,only 90bhp so must be dull as dishwater in a c4 especially if its connected to quattro.Are you changing the gearbox aswell?shame you cant find the 2.5 ael over there

    Comment

    • turboaudis4
      S2Forum Buff
      • May 2010
      • 25
      • Country: United States

      #3
      1.9 tdi in a6

      yes i changed 5th gear this car was also an auto i swapped in the 5 speed &rear diff

      Comment

      • turboaudis4
        S2Forum Buff
        • May 2010
        • 25
        • Country: United States

        #4
        1.9 tdi in a6

        yes i changed 5th gear in the trans i also had to change from auto trans to manual any chance anyone would have motor mounts/ brackets for one ?

        Comment

        • MJF
          S2Forum Hobbyist
          • Aug 2010
          • 16
          • Country: Finland

          #5
          You will have to make your own brackets. Passat 1Z block has different mounting points than longitudal TDIs.

          Comment

          • caterpillar
            S2Forum Fiend
            • Jun 2004
            • 2480

            #6
            you may use the audi 80 enginemount to the block...audi 80 from 88 and newer; thei had the engine fastend like a 5 pot..to the chassi, not on the frontend subframe...

            Comment

            • caterpillar
              S2Forum Fiend
              • Jun 2004
              • 2480

              #7
              engine mont audi 100/ a6/s6 with 1,8/2,0liter 4pot 4a0 199 307a and 4a0 199 308 may fit the 1z and ahu or similar

              the same for audi 80/ smallchassi 893 199 307a and 893 199 308 ; but oilfilterhousing may be different angel or fitment to the block( there are at least 5 differense of these....
              some of the trannys does have 2 boltpattern, so 4 or 5 or any engine will fit in..
              and the 1z or similar may be tuned easily to 140 hp-200hp or more...www.tdiforum.com i think
              good luck with the project

              Comment

              • turboaudis4
                S2Forum Buff
                • May 2010
                • 25
                • Country: United States

                #8
                1.9 tdi in c4 a6

                thanks guys. i have a couple of 80 4 cyl out back i will look at the mounts on them. i think in us all 4 cyl cars mount to subframe but maybe not. i think i have all the wiring done the mounts are next i see from reading the forums some a6/100 dont have cruise or power windows i have never seen a audi without power windows/ cruise a/c they are all fully loaded . thanks dave

                Comment

                • turboaudis4
                  S2Forum Buff
                  • May 2010
                  • 25
                  • Country: United States

                  #9
                  i couldnt find any mounts to fit so i made a set the car seems to have ok power &great economy i will post pics dave

                  Comment

                  • turboaudis4
                    S2Forum Buff
                    • May 2010
                    • 25
                    • Country: United States

                    #10
                    audi a6 tdi swap

                    here is some pics
                    Attached Files

                    Comment

                    Working...