Is it possible without too much hassle?
replacing the 2.5 V6 tdi for a AEL with quattro
Collapse
X
-
jepp.. it will fit in the car... some isue with the elektric wire.... i have a pal who have doen that... -
yeah i know,the main problem you have is that the a4 engine bay is tiny.The guy had to either move or modify everything to get it to fit so you will have to do the same with an ael which will be a fair bit of work i would say,nice idea but 'without too much hassle' i wouldnt have thought so sadlyComment
-
i cant tell you about the wirering issu; sorry for that; and does you have the DM elywheel, change it to singelmass , and the other clutch kit..... the engine will fit in the bay, and on the tranny; the easyest way; have the donor car where you take the engine from.. then you have all the bits and wiring....Comment
-
you will loose the front pannel, fans, bumper, radiator and mounting points etc etc etc
and also wiring is a propper ball ache and the A4 dash is like a christmas tree as it thinks the engine and brakes are missing!
be my guest but i worked on my car every morning and every night EVERY day in my garage i run for 3 months to get it running lol1993 URS4 Avant Emerald Green 350+bhp
1991 Ford Sierra Sapphire 4x4 in Magenta
BoooOOOSSSSSTTTT BANG BANG CHIRP CHIRP
Comment
-
the imoblizer on the AEL is also complex and not easy like the S2 ABY stuff, may also be ran through the clocks like an A4.
engine cradles also proved dificult for me, and mine was also a 2.5tdi so i know ALL about what your thinking of doing
1993 URS4 Avant Emerald Green 350+bhp
1991 Ford Sierra Sapphire 4x4 in Magenta
BoooOOOSSSSSTTTT BANG BANG CHIRP CHIRP
Comment
-
same difference in my eyes.1993 URS4 Avant Emerald Green 350+bhp
1991 Ford Sierra Sapphire 4x4 in Magenta
BoooOOOSSSSSTTTT BANG BANG CHIRP CHIRP
Comment
Comment