You can change the style the forum displays by selecting your preferred style at the bottom left of the site.
We have made an enhancement so that old threads should now link from search results to the correct thread. This is not yet in place for single post links
Did someone deal with this problem?It seems here all know that is a common problem and a new ecu flash solves it.What is that flash compensates?
No errors with vcds,no camshaft wear.I readjusted the followers screws at 0.5 turns out from max to min(that push the injectors).
Thx!!
hi belive it or not i had this broblem before with a fr leon 04 changed sensors checked everything i could tink off it turned out to be a problem with the starter swapped it with one off another fr and problem solved id recommend checking the starter since you have no fault codes showing either
The issue is that the starter or battery are worn.
What makes it worse is that to save the flywheel and clutch the stock cold start map does not inject any fuel until a certain RPM when the car is hot.
This can be copy pasted over from the automatic portion of the SW, which does not do this.
But the root cause is still hardware, because from factory all these cars start fine.
We process personal data about users of our site, through the use of cookies and other technologies, to deliver our services, personalize advertising, and to analyze site activity. We may share certain information about our users with our advertising and analytics partners. For additional details, refer to our Privacy Policy.
By clicking "I AGREE" below, you agree to our Privacy Policy and our personal data processing and cookie practices as described therein. You also acknowledge that this forum may be hosted outside your country and you consent to the collection, storage, and processing of your data in the country where this forum is hosted.
Comment