16-pin OBD plug for S2/RS2

[S2central.net]

They went like hot cakes then

01 - rjscotty
02 - newsh
03 - dahli7376
04 - macspring
05 - mac2226
06 - voursch sprung durch
07 - RS2junkie
08 - bluequattro
09 - MrG
10 - as2q
11 - sidrick

That's them all accounted for… pretty sure I have that 11th but thats the lot - I have a couple more saved specially for project vehicles (sshhh).

[S2central.net]

Here is a pic - the mounting bracket has holes at 90 degrees so you can mount vertically or horizontally through the footwell trim (or wherever).

I will get a measure of useful amount of cable length required to attach to the fusebox eyelets in the S2/RS2 - the simplest for most folk I expect - or the eyelets can be cut off for anyone preferring to splice or crimp at the black and white OBD plugs.

If anyone needs it for 3B applications then the cable can be shortened significantly to splice into OBD plugs already in the footwell.

Anyone using it in UrS4/S6 may need to extend the cables further to reach the fusebox eyelets as I cannot remember if the AAN fusebox is on same side of car as the driver.

[Error404]

If anyone missed out:

Molex Female OBDII Connector Housing p/n: 51116-1601
Molex Female Crimp Terminal p/n: 50420-8000

[S2central.net]

And a JPT crimp tool !

[Error404]

Any suitably sized uninsulated crimp tool will work IME

[bilko0795]

Hi Paul i will take one

[Vorsprung durch Technik]

I am not sure if you have a Check Engine Light (CEL or MIL) that is yellow and comes on when you first turn the ignition to run (before you hit start). If you do, you can use this procedure:

http://www.sjmautotechnik.com/troubl...f20v.html#fcs4

"Mysteries" of the CEL/ Air Bag/Seat Belt warning light panel"
http://forums.quattroworld.com/s4s6/msgs/258624.phtml

Thanks for your stella help.I need it on electrics but definately a fascinating subject.My father now sadly passed was a electronics guru.I have his Osciliscope here, i wonder if it will come in handy and any of his majic might be within me given the right help from the experts on here and there seams to be quite a few

Cheers

[urS6Tom]

S6 2x2 location

Paul - here's the picture of the S6 2x2 points that you requested

[UrS4boy]

...Anyone using it in UrS4/S6 may need to extend the cables further to reach the fusebox eyelets as I cannot remember if the AAN fusebox is on same side of car as the driver.

RHD or LHD, the auxilliary relay panel with the black and white 2 x 2 is always on the driver's side.

So the wiring follows this layout:

[S2central.net]

Thanks for clarifying that Dave.

[UrS4boy]

Thanks for clarifying that Dave.

I know it was obvious (duh) but I just wanted to put the two together in one post (the diagram and the finished product).

[AndyP]

If anyone missed out:

Molex Female OBDII Connector Housing p/n: 51116-1601
Molex Female Crimp Terminal p/n: 50420-8000

Available from??

[S2central.net]

You will find them on eBay for 3-4 quid as raw parts. I am adding cables and eyelets.

[S2central.net]

This one from China for example - Item #: 271081807862

Meantime I shall make up a cable today for a guinea pig to try out before I shoot PMs asking folk for payment.

[Henkjan]

if by any chance you make more (or if people drom from the list), I would be happy to buy one