500bhp +

[b44jhh]

Hi there can anyone guide me on bits i.e enternal bits rods pistons head work ect..
i have already got a garret gt35
3b engine stock at the moment
and also have aby engine as well i just need a shopping list if poss

[SteveH]

There are loads of posts already on 500bhp setups. The search feature will help you with your quest!

[diesel des]

Rods is the only internal mod you will need. I would run any stole ignition though to bin the dissy.

Sent from my LG-H955 using Tapatalk

[ColonialNomad]

Someone on here once suggested anything more than 400bhp on UK roads was pointless. The more I communicate with RS2 owners and mechanics, the more consensus there seems to be that its a mistake to chase numbers and assume it will result in a more drivable car.

(Unless someone is building a dragster)

[Error404]

Only a fool would fit a big turbo on a small engine and expect it to be more drivable. Depends what you use the car for. As Steve said there are tons of threads on this.
Bottom line is there is no set path to take.

[b44jhh]

Ok so which is a better engine out the two 3b or aby


Sent from my iPhone using Tapatalk

[ColonialNomad]

Pay a few thousand to tune them both up and A/B comparison! As Error says, there are different paths depending on whether your priorities are torque (and where), top line speed, reliability or installation cost.

[ColonialNomad]

Elephant in the room: What is it that you expect 500bhp to deliver?

[PRY4SNO]

Here's a good thread that came up recently.

http://www.motorgeek.com/viewtopic.php?f=1&t=82106