Impromptu Surrey & West Wales swap meet. Godalming.

[Ian Simmonds]

Great to see you guys this morning.


4.76% of the UK’s road legal S2 Avants are now filthy.

[Ian Simmonds]

And I’ve got a couple of new toys to play with…



Thanks Dave.

[newsh]

Good to see you mate, weather was mucky but that just camouflaged my filthy car lol.
Yours very obviously had a decent coat of wax on it!
I think Dave took a couple of pics!

[Tractor Dave]

Nice to see you all

[Tractor Dave]

Sent from my iPhone using Tapatalk

[newsh]

And I’ve got a couple of new toys to play with…



Thanks Dave.

Had a search for the thread on fitting these to non-ellipsoid car, it’s known as the “Martinjs mod” there’s plenty of mentions but no details!

[newsh]

Had a search for the thread on fitting these to non-ellipsoid car, it’s known as the “Martinjs mod” there’s plenty of mentions but no details!

Fitting ellipsoids to 3B
https://r.tapatalk.com/shareLink/top...ink_source=app

[andyg plym]

Both avants not lowered I see? Unlowered mine a few months back don’t think I’ll ever go backw

[newsh]

Both avants not lowered I see? Unlowered mine a few months back don’t think I’ll ever go backw

Stock springs and decent shocks is the only way.

[Ian Simmonds]

Stock springs and decent shocks is the only way.

Ditto. Ours is exactly that.

[Ian Simmonds]

Had a search for the thread on fitting these to non-ellipsoid car, it’s known as the “Martinjs mod” there’s plenty of mentions but no details!

Many thanks John. I’ll have a search and blame you when it all goes horribly wrong….

[newsh]

Fitting ellipsoids to 3B
https://r.tapatalk.com/shareLink/top...ink_source=app

This post has pics and destructions

[Ian Simmonds]

This post has pics and destructions

Just had a read through John, many thanks. Looks fairly straight forward with a bit of planning. Many thanks again. Kind regards, Ian.

[Ian Simmonds]

John, incidentally, what’s the issue if they are just plugged in as standard non elipsoid wiring? Just thinking, as it were.

[newsh]

John, incidentally, what’s the issue if they are just plugged in as standard non elipsoid wiring? Just thinking, as it were.

The dips will go off when you switch to main beam.