Nice 2.2 Engine bays - Pictures Please

[audigtrs2]

yes 6.2 kg flywheel incl. 3plate clutch tooo heavyyy

[Majorcina]

Not the best angle,but this is mine engine bay

[audigtrs2]

I drive the car today with low boost (1.3 bar - 7500 rev limit) and it was ok, the logs are okay. More boost at the dyno with more timing and more rpm. (Actual with E85 32° Ignition Advance at 7500 rpm)

[quattro-nick]

movie is not working

[Thuppu]

I drive the car today with low boost (1.3 bar - 7500 rev limit) and it was ok, the logs are okay. More boost at the dyno with more timing and more rpm. (Actual with E85 32° Ignition Advance at 7500 rpm)

Does this work?

[quattro-nick]

thanks thomas

[audigtrs2]

Thanks thomas i hope the engine could stand 11000 rpm and 4 bar boost... i planned a dyno session the whole day to find the best torque and power. In the second gear and 1 bar boost i have traction problems with semi slicks

[quattro-nick]

11000 rpm and 4 bar boost
which rods and pistons are you using?
how low is your c.r.? 7.5:1

[audigtrs2]

I use special je pistons to reduce the c.r to 7.1:1. I think i can run 45° advance timing. Rods are from cp service. The piston stands 3.2 bar with kkk 31 but i want more horses

http://www.directupload.net/file/d/3645/jjjkhl7n_jpg.htm

[audigtrs2]

This was my old turbo to much boost... it explodes at 3.6 bar

http://www.directupload.net/file/d/3645/6ydl38s9_jpg.htm

http://www.directupload.net/file/d/3645/jjjkhl7n_jpg.htm

http://www.directupload.net/file/d/3645/bwp6yuqp_jpg.htm

[quattro-nick]

thanks for the info
what"s your hp goal?
do you have also adapt your tranny? gearbox,diff,drive shafts?

[audigtrs2]

I have the last rs4 tranny with the last updates from audi, the driveshaft are normal but stiffer in the works, the diff is original, i have no problems but i think with more boost and launches the power breaks all parts but its ok, its not a bugatti its a road and drag car.

[V6quattro]

Thanks thomas i hope the engine could stand 11000 rpm and 4 bar boost... i planned a dyno session the whole day to find the best torque and power. In the second gear and 1 bar boost i have traction problems with semi slicks

Very Nice!!! I really like to see the results!

[audigtrs2]

I too man i hope this thing burns 4 cycles for audi but in a straig line

[altmanis]