Rs2 hybrid turbo, 390 bhp, 1.9 chips

[nip]

Tonight tryed the high boost 1.9 chips with my hybrid rs2 turbo, results are really sooooooooo impressive, literally no lag, always seen 1.9 bar exept in 1st gear.
EGT gauge shows 6-9 on WOT ( homefries is a tad higher ) .
Before trying heard so much about them, but always been a bit sceptical, but after fittin its soooooooooooo fast pulls really really hard all the way up the rev range
I would fully recomend 1 of these chips they are awesome.
Last of all a very big thanks to rich cheers matey

[Rocco]

congratulations


wich type of hibrid turbo do you have?? with bigger hotside??

[nip]

congratulations


wich type of hibrid turbo do you have?? with bigger hotside??

cheers rocco its a 360 bearing , like the one advertised in the for sale section mate

[avants2turbo]

just out of interest, who makes the chips? And how much?

[Rocco]

OK i know it¡¡

it is a rebuild turbo with upgraded 360 bearing for faster spool up true??


i will have to reconsider to upgrade my mine like you....

because as you can read here i´ve destroyed it with the worst of luck

http://www.s2forum.com/forum/showthread.php?t=41864&page=2

[europeanme]

nip...
cheers for this post...
I have been trying to decide on which way to go and you have answered everything!!....

[dest]

Sorry if its been posted elsewhere, but what is the full spec needed for this?

[S2central.net]

Just for reference the rs2 v-stream I am working is going for 1.9bar ... Currently with factory spring but lots of people seem to really want the stiffer spring so I'll have to look after that as well.


Paul

[avants2turbo]

Just for reference the rs2 v-stream I am working is going for 1.9bar ... Currently with factory spring but lots of people seem to really want the stiffer spring so I'll have to look after that as well.


Paul

you should get the deposit cheque today/tomorrow Paul, cant wait to see if this is the answer to all my problems, if after I have tried your ECU and if i want the V-stream is it something you can do to ecu while you have it before sending it back to me?

[nip]

nip...
cheers for this post...
I have been trying to decide on which way to go and you have answered everything!!....

mate believe me you will be shocked with the difference its truely awesome

[nip]

Sorry if its been posted elsewhere, but what is the full spec needed for this?

i have an rs2 hybrid turbo, rs2 exhaust manifold, delta 440cc injectors 3bar map sensor, i will be doin a kit for all the nessesary things needed for this upgrade in around 2 months

[Jamo]

So who's chipset is it? you haven't said

[dest]

i have an rs2 hybrid turbo, rs2 exhaust manifold, delta 440cc injectors 3bar map sensor, i will be doin a kit for all the nessesary things needed for this upgrade in around 2 months

I better start saving!

[nip]

So who's chipset is it? you haven't said

pay as you go chip (maybe orange)

[nip]

I better start saving!

its well worth it, il even let anyone drive mine to see what they think