Rolling road results

[s2_wot]

They're the same on both sides. You can just make out the 240 on the same line, and he said ~460ft/lb which works on that scale

+ + I think that says it all!!

[nip]

Hello Nip,
If I read that right you've got the hp scale on the right hand side and the torque scale on the left hand side. Is there any way you could get the figures on the scale and post them up, I think they've been chopped off by the printer.

hi s2wot, all of the rolling road printouts are the same as these ones afaik,
ross is correct

[s2_wot]

hi s2wot, all of the rolling road printouts are the same as these ones afaik,
ross is correct

If I'm honest I never examined them that closely before. Impressive results.

[nip]

If I'm honest I never examined them that closely before. Impressive results.

Cheers shane

[pixsaudisex2]

Is this the longest you have ever kept one running..

[macspring]

i only paid £399 brand new for mine when rates were better. im told i can get at least 1k better spool and same or slightly better performance for about £1200. thats a slightly smaller turbo too.

Ca you advise what turbo was that for £1,200 that you were referring to?

Thanks.

[nip]

Is this the longest you have ever kept one running..

yep, i didnt have to bump it up as some do

[Rocco]

Nip,do you know why the torque drops quickly like in my RS2
setup??


or is it caused by the old desing turbos??

[nip]

Nip,do you know why the torque drops quickly like in my RS2
setup??


or is it caused by the old desing turbos??

Not too sure rocco,

[ian4455]

Advice please, where's the best place to buy performance parts?

[Rocco]

Advice please, where's the best place to buy performance parts?

what type of performance parts?

[bluequattro]

Ooh, I d like that set up on mine
What cc do rs2 injectors run? I ve a set of those somewhere
Anyone run a Holset turbo?
My mate swears by them and has fitted various ones onto his Trans Am, think his current one is 86mmcold side, but dont quote me on that
NOt been on R road but guesstimates circa 650-700bhp ( its a 383 ci Chevy stroker)

[T2Andy]

RS 2 inj are about 380cc ,I've read they will do about 400 bhp approximately before maxing out

[prj]

or is it caused by the old desing turbos??

Yes.