I´m waiting parts from CP-Service
Announcement
Collapse
No announcement yet.
Audi Coupé Quattro 20V
Collapse
X
-
Some photos.
I´m waiting Diag Gauge Tacho of Audi S2 from Rusty K24 member .
Last week went aux gauge from Audi S2/RS2.
I sent aux gauge to paint rims.
When I have some time to mount and show.
My original aux gauge, good conditions
The interior was restored by me. Not bad
The lining roof:
Outside hears changes in the painting of bumpers that were gray. Are now in color as the law requires. All black.
And the engine in good condition 100% original ( NM POWER )
Now for that matter, to the engine!
I'm waiting for more parts from 034Motorsport for the Quattro. Block off to the distributor who is now eliminated, injectors, spark plugs and fuel pump.
The headgasket that I ordered as I wanted:
After mounting the crankcase, the end because there was still a board, we started assembling the cylinder head. The head already has solid lifters
MLS + Copper.
The third and final layer to the head gasket.
The cover is in turning the valves to make a change to the placement of coils independent. This makes it all more compact.
I had two intake manifolds for the Quattro but none were what I wanted. He had an Audi S2 3B and the other from 100 S4 Audi AAN but ... and decided to buy one of Wagner Tuning - PK Motorsport.
When we arrived the house was black:
After pickled and clean as it should be I took him to the painter to varnish, as I did the cover of the valves.
I will not say for now is all because I have already made other advances. When you have a little more time put forth more news.
I hope you like it.: MINI Cooper D 08' :.
.: Audi Coupe Quattro 20V 91' :.
.: Audi Porsche RS2 95' :.
Comment
-
Clean look from outside. Plan is to leave the original front bumper or s2 one?
How wide the boleros are? 7" or 8"? ET i guess is 37?1990 2.2 20VT Audi Coupe Quattro
*Hx35/k26, MaxxECU, Wagner EM/IC *RS2 Recaro *4pot-Brembo *3" turboback *Treser *Koni/H&R
1990 Audi 200 20v Avant 2.2 20VT *7 Seater *Full electric gizmos
Comment
-
Originally posted by Kiku View PostClean look from outside. Plan is to leave the original front bumper or s2 one?
How wide the boleros are? 7" or 8"? ET i guess is 37?
Thank you.
I will put original S2 front, lights B4 RS2, bumper S2 because is impossible put Intercooler in original 20v bumper.
About wheels are Bolero, i will sell it and put same Bolero but with 5x112. I will too put original hubs S2.
Wheels are 8" but about ET i don´t know but maybe 35 or 37.
Regards.: MINI Cooper D 08' :.
.: Audi Coupe Quattro 20V 91' :.
.: Audi Porsche RS2 95' :.
Comment
-
Originally posted by Nuno Cristiano View PostHi,
Thank you.
I will put original S2 front, lights B4 RS2, bumper S2 because is impossible put Intercooler in original 20v bumper.
About wheels are Bolero, i will sell it and put same Bolero but with 5x112. I will too put original hubs S2.
Wheels are 8" but about ET i don´t know but maybe 35 or 37.
Regards
1990 2.2 20VT Audi Coupe Quattro
*Hx35/k26, MaxxECU, Wagner EM/IC *RS2 Recaro *4pot-Brembo *3" turboback *Treser *Koni/H&R
1990 Audi 200 20v Avant 2.2 20VT *7 Seater *Full electric gizmos
Comment
-
Small update project:
Original Tacho use black dial gauges.
Before:
After:
OEM from UrS4 Outside display to measure outside temperature.
In experience:
Finally:
So, i love grey/white colour of dial with my original interior colour. Wood + grey/white is nice.
RARB from Audi Coupe TYP89 26mm.
PowerFlex bushes, bought all parts of PowerFlex to Audi Quattro 89Q.
KW V3:
In chassis by now is it...
Advance in engine!
I worked 7A cam couver to P&P coils from Audi RS4 V8.
Regards.: MINI Cooper D 08' :.
.: Audi Coupe Quattro 20V 91' :.
.: Audi Porsche RS2 95' :.
Comment
Comment