AMD's 200 20v - QUAT44RO

[amd is the best]

[bazburn]

http://youtu.be/CriQCG2Jcao

Love the sniggering/expletive's....

[amd is the best]

Love the sniggering/expletive's....

My buddy was quite excited about the top end of the new setup

[quattrostyle]

Sounds great

[caterpillar]

nice sound.... great car

[amd is the best]

Thank you guys! I'm excited to have it back up and running after 8 months! Needs some things buttoned up and the boost can go up

[anthonys2]

I loooooooove your 200 and its sounds bloooody AWESOME!!!!!

[5cylinderman]

Yummy

[amd is the best]

Yummy

I loooooooove your 200 and its sounds bloooody AWESOME!!!!!

Thanks guys!

[drago]

It sounds amazing, love it!
I've got a question for you - since you are using 01E 6 speed, which as far as i know is longer than the original 5 speed, what cardan shaft are you using? I mean the OEM shaft is too long for this gearbox, did you replace it and if so, from what? From V8 d11 4.2 manual maybe?

[amd is the best]

It sounds amazing, love it!
I've got a question for you - since you are using 01E 6 speed, which as far as i know is longer than the original 5 speed, what cardan shaft are you using? I mean the OEM shaft is too long for this gearbox, did you replace it and if so, from what? From V8 d11 4.2 manual maybe?

The 01E is actually shorter than the 016 transmission by ~20mm. I slid the engine and transmission back as far as it could go and the driveshaft reached no problem.

[Spidey]

Sorry that I used your two photos, but your beauty is on my workbook now

[amd is the best]

Sorry that I used your two photos, but your beauty is on my workbook now

http://s15.postimg.org/eta11u6aj/IMG_3594.jpg

I'm quite alright with that

[amd is the best]

However...

I will share this with you guys so EVERYONE can know. Do NOT use Cat Billet steel camshafts with the new revision of the Tommis billet cam gear (without some kind of modification)....:

The front interior nose face of the Cat billet cams is .009 taller (longer) than a factory cam. A Cat cast version of the same 2305 cam is only .003 taller than factory. The old style Tommi's cam pulley will tolerate any of these noses, as will other cam gears of similar design. The old style Tommi's cam pulley will tolerate any of these noses, as will other cam gears of similar design.

Old style Tommis (good clamp between back of gear and front of cam):


New style Tommis on stock cam (mediocre clamp):


New style Tommis on Cat Billet Camshaft (no step to apply clamp to the back of the gear relying on only the key):

Hopefully back up and running ASAP.

[Bowie69]

So lunched the pulley and 10 new valves is it?

Shame