S4 aan engine for sale

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • MOTORHOOLIGAN
    S2Forum Enthusiast
    • May 2010
    • 119
    • Country: Spain

    #16
    Stops 15 years ago, No valve cover, no spark cover with all pieces, no turbo, no intaque, no exhaust, no wastegate, no fuel ramp, no injectors, no distribution cover, no water manifold, no flywheel, no damper, no pulley, no many things.... , only engine block and cylinder head...

    666 euros

    This is a real price. And it's a really good price.



    Thanks for the link

    Do you want to buy one for a S2 3b like this?

    https://www.s2forum.com/forum/member...ngine-for-sale

    If you only needs the same pieces like eBay link We can talk about this
    Last edited by MOTORHOOLIGAN; 6 November 2017, 15:56.

    Comment

    • Vorsprung durch Technik
      S2Forum Freak
      • Jun 2007
      • 4754
      • Country: United Kingdom

      #17
      Originally posted by MOTORHOOLIGAN

      today we have learned something, if we want a full UrS4 engine it can be found in Finland for only 700 euros.

      :-)
      Very good!



      96 URS6 plus speck saloon
      96 URS6 plus speck estate
      94 2.6 80 Avant
      99 2.8 final edition Cabriolet

      Comment

      • A80Avant
        S2Forum Obsessed
        • Sep 2005
        • 10873
        • Country: Greece

        #18
        prices are going up on these engines but you have to keep in mind that even a 160k motor will be stripped checked and potentially need 1step larger pistons and cylinder head overhaul.

        IF you did say that before stripping the engine you had checked the compression and there was a good service history on the engine, then price could go higher.

        having very recently spent a fortune with new and second hand parts I can see how painfully rebuilds are. So the more info you have on am engine the easier it sells. 160km as it sits means at least 600 to 700euro on head rebuild (if you are able.to use the same valves), about 1000euro on gaskets and bearings, if cylinder bores are ok you need about 200 to 300euro on piston rings otherwise 970euro for new 2nd stage pistons

        Comment

        • zafra
          S2Forum Addict
          • Jun 2013
          • 320
          • Country: Spain

          #19
          Originally posted by MOTORHOOLIGAN

          Don't worry! Opinions always be welcome

          Two years ago I paid around 1500 euros only for rebuild my Cylinderhead. Only for rebuild this, and I mount this in my car

          In the last two years the price for an S2 and UrS4 it's really high

          6 years ago you can buy an Rs2 for 10.000 an S2 for 3.000 and a UrS4 for 1.500. Now this prices are impossible to find

          This same week I can see in ebay a 3b engine for 4.000 euros in Poland

          https://m.ebay.ie/itm/engine-audi-s2...257Ciid%253A41




          I'm not angry, for only 900 euros this engine stay in my home. If you find a complete aan engine in good condition in this time for only 700 euros buy it. No doubt. This engine only have 160.000 kms and its complete


          Best regards from spain
          Absolutely agree.
          for 700-900 € you have a 1.9 TDI engine, there are no cheap things as far as 2.2 20vt.
          It would have been smarter to make an offer and say that shipping is expensive.
          I invite you all to look for cheap s2, rs2 or s4 in my country. Luck.
          Step 1: setup. <==
          Step 2: potentiation.
          Step 3: enjoy.

          Comment

          Working...