Announcement

Collapse
No announcement yet.

Old Quattro Audi Parts lot for sale+b2 cq

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Old Quattro Audi Parts lot for sale+b2 cq

    Decided to sell all audi related parts i got during the years.Parts and bits are numerous,will describe here just some of them.


    AAN engine block bored and honed to 81.5 mm with new Wosner pistons,new forged rods(i remember FCP but i could check),new Kolbenschmidt bearings,main and conrod bearings(conrod ones sputter)
    AAN engine block sleeved at 81mm
    AAN stock block needs rebore
    AAN head,some small cracks
    7A head,no cracks,with coolant rail mod and camshaft sensor bracket mod
    AAN ecu NOT OPENED
    AAN ecu PRJ software and map
    AAN ecu(had MTM eproms in it if i remember correctly)
    3b BROKEN ecu
    AAN engine loom 2 pcs
    coil conversion loom new
    b2 digital dash,green,with original electric plug on rear
    1 or 2 aan crankshafts
    3 or 4 aan sets of camshafts
    2 or 3 aan k24 7000 turbines
    3 or 4 aan sumps
    2.3 10v NA compleete engine
    1 aby sump
    1 rr NEW camcover
    2 or 3 aan camcovers
    oil pumps(3 or 4)
    AAN intake manifolds(2 or 3)
    AAN exhaust manifolds(2 or 3,one i remember crack free,the rest need to check)
    wastegates and wastegate parts(maybe 3 compleete and some in parts)
    Injector rails(2 or 3)
    starters and alternators(i think 2+2 maybe more)

    Will stop writing number of parts.Where i know for sure will do,where i do not remember consider at least 2 pcs/sets

    aan engine alu mounts
    coupe 5 cyl engine alu mounts
    coolant rails,aan type and aby type
    old and new r134 refrigerant s4 ac compressors(unknown condition)
    steering pumps
    b2,b3,b4 coupe subframes front and rear,some rear ones with stabi bar,some without.NO 01E front subframe.Just 01a and 016 FRONT SUBFRAMES
    b2,b3,b4 coupe hubs front and rear.ALL 4 studs,NO S2 one
    b2,b3,b4 coupe struts.NO S2
    1 set of 7a coupe quattro sport suspension(h&r springs and billstein thick shocks,upside down system),shocks with no leaks
    steering racks b2,b3,b4.NO RS2
    1x s4 rear axle compleete with hubs,subframe,driveshafts,differencial
    b2,b3,b2 coupe rear differencials
    b2 gearbox with center diff lock 2 of them
    b3,b4 01a gearboxes
    1x01e gearbox 5 speed


    If needed will look for codes on boxes and diffs.

    s4 downpipes
    1 set of 16 inch s6 c4 avus rims with center caps
    1 set of 16 inch Borbet A 4x108 rims
    s4 avant leather interiour(seats,door cards)
    S2 crossmember and intercooler
    s2 front bumper with signals,fogs and grills
    s2 rear bumper
    s2 front headlights NOT lens type
    s2 coupe trunk cover
    tons of sensors,brackets,oil and coolant lines,MAF etc etc
    3 victor reintz head gaskets with lots of other new gaskets,seals etc
    crank sprockets with no cracks
    dual mass flywheels
    single mass flywheels(1 i think is RR and one 3b)
    intake and exhaust valves,springs retainers and 30 or 40 new valve guides
    b2,b3,b4 and c4 brake calipers.Front single piston,front girling 2 piston,front s6 4 pads type.Rear not vented disc type and vented disc type

    And much more.Parts are in boxes(new ones and small ones) and in a small place that will take my all shop and stop me from working if i get all out and try to get exact inventory.Could do some pics with heads,engines and some other parts that are easy accesible.

    ALL THIS + 1985 b2 coupe quattro.Sandblasted where needed,epoxy primer,all covered in sprayabble rubber sealant and repainted.Has no door cards on,i have some sets but in bad condition.Also engine bay not refurbished.Has new fuel and brake lines,But suspension and bushings need redone.My idea was to have it painted,all underbody perfect and sandblast/powdercoat a full suspension,subframes etc,replace all bearings and rubbers and have all fresh.But i just managet to paint it 2 or 3 years ago and that was it.Car has driver seat recaro,new windscreen,new rear black lights.Have documented the restoring to this point,so i could supply pics.
    I have a recent clip with the b2.

    I would sadly let all this go for 18.000 eur.



  • #2
    https://youtu.be/CMp7_UKcJp0
     

    Comment


    • #3
      Need to look fore more pics.
      You do not have permission to view this gallery.
      This gallery has 1 photos.

      Comment


      • #4
         

        Comment


        • #5
          Are the S2 headlights B3 or B4 and are they still available?


          Sent from my iPhone using Tapatalk

          Comment


          • #6
            1 rr NEW camcover
            1 set of 7a coupe quattro sport suspension(h&r springs and billstein thick shocks,upside down system),shocks with no leaks
            steering racks b2,b3,b4.NO RS2
            what is the price of the two positions?

            Comment


            • #7
              Hi, do you have rear subrame for b3/ cq whit stab. bar? Thank you!

              Comment


              • #8
                After a rr flywheel pmd you mate

                Comment


                • #9
                  Originally posted by kibby View Post
                  After a rr flywheel pmd you mate
                  I hope I was first, but still no reply
                  sigpic_________
                  Rob

                  Comment


                  • #10

                    -AAN engine block bored and honed to 81.5 mm with new Wosner pistons,new forged rods(i remember FCP but i could check),new Kolbenschmidt bearings,main and conrod bearings(conrod ones sputter)
                    -AAN ecu PRJ software and map
                    -b2 digital dash,green,with original electric plug on rear
                    -1 aan crankshafts
                    -b2 gearbox with center diff lock 2 of them
                    -Intake air temperature sensor

                    Price please

                    Comment


                    • #11
                      I am confused is there written that he sells something separately? There seems to be price for whole lot and you must buy all.

                      Comment


                      • #12
                        I will give him a call. I am sure he sells separately as I have bought a few things from him.

                        ​​​​​​

                        Comment


                        • #13
                          Thx for interest.Not been here lately.All audi related parts were sold.Thx again!!
                          When audi tradition invites you to get parts "from forums"for a 1987 car that they use the image in almost all their new car releases commercials,there in no need to use capital letter A in the name of the brand.

                          Comment

                          Working...
                          X