GROUP BUY stainless steel subframe washers 823-199-347

[John.]

Steve, can you clarify...…..are you referring to a set as 4 or 8 ?

Apologies, I've had a long day.

[steve briance]

Costash 1 set.
John 1set
Arranstone 1 set (4 front 12mm and 4 rear 10mm)
S2eds 2 sets (1 set for late aby 4 front 12mm and 4 rear 10mm. 1 set of 10mm)
Me 1 set. (each 10mm)
Tractor Dave. 1 set. (4 front 12mm and 4 rear 10mm)
LukasR 1 set.
Nuvo x2 sets (each 10mm) please.

[John.]

@john, no worries - a set in my book is 8

[LSG]

I,ll take a set for my S2 coupe 94.Thanks lynn

[steve briance]

No problem, will add you for 1 set. Don't suppose you happen to know whether your 94 year car has 12mm front bolts do you? I've no direct experience of the later cars but I see 95 year cars are 12mm. Ordering 10mm is a safe bet as they can be made larger but 12mm can't be made smaller! Happily being stainless means there is no costing that would get damaged with a drill operation.

[steve briance]

Costash 1 set. John 1set
Arranstone 1 set (4 front 12mm and 4 rear 10mm)
S2eds 2 sets (1 set for late aby 4 front 12mm and 4 rear 10mm. 1 set of 10mm)
Me 1 set. (each 10mm)
Tractor Dave. 1 set. (4 front 12mm and 4 rear 10mm) to be confirmed about rear avant washers 84x12.1x3mm
LukasR 1 set.
Nuvo x2 sets (each 10mm) please.
LSG. 1set.

[Tractor Dave]

According to 7zap, Avant is M12 at the rear as well. Washer is listed as

12,1X84X3 so would need to be larger diameter as well.

[steve briance]

Good searching tractor Dave! I'm going to have to see how flexible the laser cutting people are - the outside diameter at 84mm is the only ones that size so far. It may mean another set up cost It may not though because the program could be made to do however many 40mm diameter ones and then your 84mm on the same plot.

I will have to answer that for you another day.

[YELL MAN]

I will go for a set too please. It's for a 94 ABY coupe.
Best to go for the 10mm and as was mentioned bore out the washers if necessary, It has been many years since I had the bolts out so can't say what they were.
Thanks,
Brian.

[steve briance]

Costash 1 set.
John 1set
Arranstone 1 set (4 front 12mm and 4 rear 10mm)
S2eds 2 sets (1 set for late aby 4 front 12mm and 4 rear 10mm. 1 set of 10mm)
Me 1 set of 10mm
Tractor Dave. 1 set. (4 front 12mm and 4 rear 10mm) to be confirmed about rear avant washers 84x12.1x3mm
LukasR 1 set.
Nuvo x2 sets (each 10mm) please.
LSG. 1set.
Yellman. 1 set of 10mm.

12 sets reached. (tbc the 13th for tractor Dave and the rear 84mm dia washers being possible in the same batch)

I am sure that we will reach the threshold so that will be £8 per set plus postage for some shiny stainless steel goodness. will post pics once I have them.

[steve briance]

12 sets confirmed, 3 to be confirmed.

Costash 1 set. John 1set
Arranstone 1 set (4 front 12mm and 4 rear 10mm)
S2eds 2 sets (1 set for late aby 4 front 12mm and 4 rear 10mm. 1 set of 10mm)
Me 1 set of 10mm
Tractor Dave. 1 set. (4 front 12mm and 4 rear 10mm) to be confirmed about rear avant washers 84x12.1x3mm
LukasR 1 set.
Nuvo x2 sets (each 10mm) please.
LSG. 1set.
Yellman. 1 set of 10mm.
Miika987. 2 sets of 10mm to be confirmed re postage...

[Costash]

Costash 1 set(4x12 fronts 4x10 rears). John 1set
Arranstone 1 set (4 front 12mm and 4 rear 10mm)
S2eds 2 sets (1 set for late aby 4 front 12mm and 4 rear 10mm. 1 set of 10mm)
Me 1 set of 10mm
Tractor Dave. 1 set. (4 front 12mm and 4 rear 10mm) to be confirmed about rear avant washers 84x12.1x3mm
LukasR 1 set.
Nuvo x2 sets (each 10mm) please.
LSG. 1set.
Yellman. 1 set of 10mm.
Miika987. 2 sets of 10mm to be confirmed re postage...
[/QUOTE]

[steve briance]

Thanks costash.

John, LSG and LukasR Amy feedback on the sizes you would like? 10mm is the safe default that can be made bigger if needed but if you confirm you need any 12mm, I can sort that out.

[tango123]

can i have 4x12mm front & 4x10mm rear please

cheers

[john bowden]

Could I be put down for two sets please (16 washers in toatl)

John