ATE vacuum brake booster - nearly new

[Error404]

I've got a nearly new ATE vacuum brake booster to suit a B3/B4 vacuum servo converision.
This was bought new a few years ago and was used for approx 3k miles before the car came off the road and I converted to use an RS6 setup.
These are NLA now from all sources so this is probably the best single stage vacuum brake booster you will ever find now. When you could buy these new they were over £300.
Comes with a good 25.4mm master cylinder & reservoir, plus the firewall adapter bracket.

£175 plus post.

IMG_2745.JPG

IMG_2746.JPG
IMG_2748.JPG
IMG_2747.JPG

[Rikki Kitto]

Hi Alex do you think would be better than the one I currently use or should I just adapt the inlet pipe and go double

[Error404]

If your single stage one is working this won't be an upgrade for you, other than you will get many years of trouble free use from it.

If you can, I would go to the dual stage booster, it is a massive upgrade.

[Rikki Kitto]

[Greg_S]

With your fitting kit can this be fitted without having to cut the chassis brace on the ABY.

[Error404]

Hey Greg, all the vacuum conversions on RHD S2 require the brace to be cut out.
On the ABY the fuel lines need to be moved too

[Error404]

Bump. Open to offers as I need this gone
Will include a free vacuum hose and check valve