Porsche 996 brake set up!!

[c_jam01]

Up for sale i have a full porsches brake set up that was fitted to my s2, has only covered a few thousand miles if that!!

pads hav tons of life left, disks are like new 314mm jobbies i think!!

sold these once, but buyer has not been in contact since initial talks and failed to collect on the agreed date!! so please no timewasters

£500

pm me ring me on 07841752270 or email on c_jam01@hotmail.co.uk

[c_jam01]

who wants these!!!

[Error404]

hate to say it but those discs are not "like new" and if that set of pads has been run with them they're proably scrap too...

[c_jam01]

hate to say it but those discs are not "like new" and if that set of pads has been run with them they're proably scrap too...

discs are like new in the respect that they hav had hardly any use. car was sat for around 3 months, then driven a few miles then brakes taken off, there is no lip on the discs so wood require a skim if that!! try and find a complete ready to bolt on set up for less!!!

[Acidburn]

I think he's refurring to the scoring on the disc, depending how bad it is and what its done to the pads.

[Error404]

Try and skim a used disc and see what happens - you need carbide tipped tools becasue the discs gets so hard with the heat cycling - its cheaper and easier to buy new discs IME. I wasn't trying to be arsey but its always best to be realistic about stuff you are selling to fellow members

[s2martyn]

hate to say it but those discs are not "like new" and if that set of pads has been run with them they're proably scrap too...

pads have not made full contact with disc

[bambridge]

Skiming discs

Have skimmed many discs for the garage next to me, always make sure you clock up the inside face to within 0.1mm runout before skimming the outer face, these really should be ground properly to get them parallel

[stevejam01]

Try and skim a used disc and see what happens - you need carbide tipped tools becasue the discs gets so hard with the heat cycling - its cheaper and easier to buy new discs IME. I wasn't trying to be arsey but its always best to be realistic about stuff you are selling to fellow members

i think some of us are off in the wrong direction with these discs. they do not require skimming. they have stood for 3mths and then driven 8 miles prior to being removed. they are not scored, they may not be "like new" but they are certanatly not "like old" either. "hate to say it but" "im not tryin to be arsey" either. these discs are as they came off the car, just being honest. other forum members have feelings too. regards steve. ps carbon tipped tool, sounds right to me.

[dest]

Strange first post....

How much for just the calipers and carriers?

[avants2turbo]

Strange first post....

How much for just the calipers and carriers?

Well maybe its not his first post, just his first post under a new user name

[Acidburn]

Well maybe its not his first post, just his first post under a new user name

[s2driveruk]

For what its worth, i'd do yourself a favour if you think they are in better condition than they look and get a decent close-up picture of the face(s).

Looks to me like they are knackered but its unfair to make an assumption without a decent image. If its just a case of no real pressure applied to get a clean sweep of the disc then fine but but looks like scoring or maybe part of the pad broken off (seen that before) and it causes that effect too...

[stevejam01]

Well maybe its not his first post, just his first post under a new user name

Nothing strange about stating the obvious and yes that was my first post on this forum.

[dest]

Schizophrenia anyone