Various parts AAN & ABY

[Colesy]

Thought I'd pull all my for sale threads together rather than bumping them all:

Used (25k miles) Sachs ABY clutch, release bearing & flywheel, bought from NIP on here. £100 + P&P

http://www.s2forum.com/forum/showthread.php?t=53060

New OEM Head bolt set. £30 inc

2 Bilstein S2 front shock absorbers, 1 is soft, other ok £100 inc

Original seat bases cut off OEM seats ideal to mount bucket seats. £60 inc

URS4 front subframe, with all recently replaced OEM bushes. VGC. £50 + P&P
Pictures: http://www.s2forum.com/forum/showthr...highlight=urs4

Set of 4 A8 wheels, all could do with a refurb, 1 Pirelli (245 45 ZR 18 96Y) tyre has 5mm of tread, other 3 need replacing. £150 collected
Pictures:http://www.auctiva.com/hostedimages/...0,0,0&format=0

Sunroof control panel. Preselect SOLD & other from S2 avant. £20 inc.


Various other S4 parts including steering wheel: http://www.s2forum.com/forum/showthr...highlight=urs4

4 doors, 2 rusty, 3 with window mechanism - £50
pictures of the above: http://www.s2forum.com/forum/showthr...highlight=urs4

URS4 clutch master and slave cylinders, used for 9k miles. Have receipt from when fitted in 2008. Master £45, Slave £40. + p&p

[javispa]

Original seat bases cut off OEM seats ideal to mount bucket seats. £60 inc

Any pictures of these seat bases?
Are they from an ABY or from an AAN car?
Thanks.
Cheers!

[Colesy]

They're from an ABY:

[Colesy]

Bump

[Colesy]

Also have a set of 8 new M12 alloy subframe bushes suitable for most front subframes. £40 delivered

[jade]

subframe bushes

Also have a set of 8 new M12 alloy subframe bushes suitable for most front subframes. £40 delivered

Hi

I will have the subfame bushes

Thanks

Wayne

[Colesy]

Bump

[Colesy]

Steering wheel has now sold!

[javispa]

Hi, I am interested on the bases but I would like to make sure that they will be fine for what I want them. A guy I know has used some modified OEM bases like the ones you sell (but I haven't seen them, so they may be modified in a different way) to mount a backet seat and it seems that the seat is in a very high position. I want to use them to mount a couple of Recaro seats from a Golf 2. As the bases are different from the Recaro ones, I first wanted to make sure how high would the seats be.
It would be very kind of you if you could measure the height of the base, from the ground to the point where the seat would be attached, something like what I have drawn in the attatched picture, so that I could compare with the Golf bases attached to my seats.
Thanks very much for your attention.
Javier.

[Colesy]

Hi, I am interested on the bases but I would like to make sure that they will be fine for what I want them. A guy I know has used some modified OEM bases like the ones you sell (but I haven't seen them, so they may be modified in a different way) to mount a backet seat and it seems that the seat is in a very high position. I want to use them to mount a couple of Recaro seats from a Golf 2. As the bases are different from the Recaro ones, I first wanted to make sure how high would the seats be.
It would be very kind of you if you could measure the height of the base, from the ground to the point where the seat would be attached, something like what I have drawn in the attatched picture, so that I could compare with the Golf bases attached to my seats.
Thanks very much for your attention.
Javier.

Only just saw this, as luck would have it I have a stripped out cabriolet outside that I could fit them into easily, so will do a test fit and take measurements tomorrow.

[javispa]

Thanks very much .
Cheers.

[Colesy]

I've taken measurements as pictured below, the rear mounting bar sits 11cm above the carpet and the front 6cm above the mount.



Here's a picture of the handbrake lever as requested djh:

[javispa]

I sent you a PM last week.
I have checked my seats and they would fit pretty fine, so I would have the bases.
Cheers.

[Steyn_b]

Is they flywheel a daul mass ?