tubular exhaust manifolds ready to ship

[Albert]

Ok. I have manifold in stock.

[orignalS60]

Albert is it possible to make one with a Tial turbine v-band flange and Tial v-band waste gate flange?
Also a matching 4" v-band down pipe and a waste gate dump tube would be cool. Let me know.

[20v]

Ok. I have manifold in stock.

one with v-band 3''? that i need for my new turbo?

[Albert]

This is the question that I am asking. What is between turbo and exhaust manifold in your new setup. The 3 inch v band is on the exhaust of the turbo. Right ?

Can you send a pic or a full name of the turbo with part nr.

[Albert]

Albert is it possible to make one with a Tial turbine v-band flange and Tial v-band waste gate flange?
Also a matching 4" v-band down pipe and a waste gate dump tube would be cool. Let me know.

Everything is possible. Just a matter of time and money

PM me for more details.

[orignalS60]

One change that should be easy is to change the t3 flange for a v-band flange and the audi waste flange for a tial vband waste gate flange.
That's what I plan on running. They already have two version available in the states but for surprisingly a lot more than your asking.
I will be running a PTE6766 with a 0.82 A/R v-band housing and a tial MV-R 44mm v-band waste gate. I was hoping I could save some
money going through you instead of Hank @ Iroz Motorsports.

[ringbearer]

That is a good price

[Albert]

One change that should be easy is to change the t3 flange for a v-band flange and the audi waste flange for a tial vband waste gate flange.
That's what I plan on running. They already have two version available in the states but for surprisingly a lot more than your asking.
I will be running a PTE6766 with a 0.82 A/R v-band housing and a tial MV-R 44mm v-band waste gate. I was hoping I could save some
money going through you instead of Hank @ Iroz Motorsports.

If you can supply me with technical drawings of both od the housings than it can be done.

Some tech drawings you can find here. Page 89 and +. https://www.turbobygarrett.com/turbo...Catalog_V5.pdf

[20v]

This is the question that I am asking. What is between turbo and exhaust manifold. The 3 inch v band is on the exhaust of the turbo. Can you send a pic or a full name of the turbo with part nr.

here is the pic
between turbo and exhaust manifold The 3 inch v band (76mm)

[20v]

This is the question that I am asking. What is between turbo and exhaust manifold in your new setup. The 3 inch v band is on the exhaust of the turbo. Right ?

Can you send a pic or a full name of the turbo with part nr.

here is the link with the tial housing

http://www.atpturbo.com/mm5/merchant.mvc?Screen=PROD&Store_Code=tp&Product_Code=ATP-HSG-023&Category_Code=TTH

[Albert]

I can do it but I need tech drawing or sending the parts to me (housing and V-band).

[orignalS60]

3" inch v-band is for the outlet for the down pipe. The Tial housings
inlet for the exhaust manifold is 2.125" OD and the outlet for the down pipe
is 3" OD. So Albert needs to know the 2.125" inlet to match the flange on his
exhaust manifold.

[20v]

I can do it but I need tech drawing or sending the parts to me (housing and V-band).

it is 2 complicate. u could send me an exhaust manifold with no flange ? i will put the flange on the exhaust manifold here.....

[Albert]

ok, no problem

[20v]

ok, no problem

u have p.m.