My 3B Coupé Project.

[4WheelDrifter]

they look really good, was it just a wire drill attachment and hammerite?

Just wire brush drill attachments, a coat of Kurust and a couple of coats of Hammerite. All stuff I have in the garage anyway, so not much cost involved.
If I wanted them to look really good I could've given them another coat or two of Hammerite, and picked out a few more of the bristles from the 10p brush I used. But at the end of the day the car isn't going to be a concours winner with mirrors under it. As long as the rust doesn't come back, I'll be happy.


David, I've just got the car on blocks at the usual jacking points. I just put my trolley jack under the rear diff, took the driveshafts off, undid the lower ball joints, disconnected the diff vacuum lines and unhooked the handbrake cables Then I just undid the subframe mounts and gently lowered it all down.

Obviously the front one was really easy for me, what with no engine or suspension there. I dropped (literally) the gearbox and front subframe out as one too.

I couldn’t get the propshaft bolts undone, so I dropped the gearbox, prop, and reat diff down onto a plank and slid them out the front of the car. Then dismantled it all there.

[s2driveruk]

looking bloody good there Stu....I got quoted £35 for the front and rear subframes and arb's for a grit blast and powder coat. Plan it to get them off this weekend. Still sure that price is wrong - if not then the struts will be coming off too for a blast and paint I think, seems pointless not to.

To drop the subframes, where is the best place to move the axle stands too? currently the car is off the ground but the stands or on the subs.

Oh BTW......I ain't brave.....DEFINATELY stupid for deciding to kick this project off

[Acidburn]

Indeed. I wonder if I'm brave or stupid.

Will do, Paul. I've started another weight saving exersize tonight. :mischeif: I'll post some more pictures when I get chance.

In the meantime here's the freshly painted subframes.


I might even put the rear subframe on this weekend. That will make a change, fitting something to the car, rather than removing it.

they look really good, was it just a wire drill attachment and hammerite?

[4WheelDrifter]

Looks like messers Stu & Corbin have their work cut out BIG style - brave stuff... Pictures of the stripped cockpit are the most stressful - you look at those and wonder how the heck it will ever go the same again.

Indeed. I wonder if I'm brave or stupid.

Nice work for weighing everything meaningful that gets stripped. Quite a gearbox upgrade Stu has in the works. The 01A is just not man enough for the torque from a modified S2 engine.

Please keep us all updated with lots of photos and info of progress !

Paul

Will do, Paul. I've started another weight saving exersize tonight. :mischeif: I'll post some more pictures when I get chance.

In the meantime here's the freshly painted subframes.


I might even put the rear subframe on this weekend. That will make a change, fitting something to the car, rather than removing it.

[S2central.net]

Looks like messers Stu & Corbin have their work cut out BIG style - brave stuff... Pictures of the stripped cockpit are the most stressful - you look at those and wonder how the heck it will ever go the same again.

Nice work for weighing everything meaningful that gets stripped. Quite a gearbox upgrade Stu has in the works. The 01A is just not man enough for the torque from a modified S2 engine.

Please keep us all updated with lots of photos and info of progress !

Paul

[4WheelDrifter]

Nice work mr. Stu, mine looked something like that at 8 this evening in front of the garage and all I wanted to do was fit my new rad... this must be some sort of westcountry disease where if you say radiator you mean whole car or something like that. Are you not tempted to fit a thicker RARB? I got my 24mm and 25mm bars from All Audi for 5/8ths of FA. No more work to fit if everything is of the car but if you liked the Whiteline then that's the way to go again.

I'm tempted by a FARB on the rear after having a go in your car, but I'm planning to try a set of Bilstein dampers next. They should be a lot stiffer than the Konis. I'll see how it handles then, and keep the 23/24/25mm RARB options in mind.

[Rusty]

Nice work mr. Stu, mine looked something like that at 8 this evening in front of the garage and all I wanted to do was fit my new rad... this must be some sort of westcountry disease where if you say radiator you mean whole car or something like that. Are you not tempted to fit a thicker RARB? I got my 24mm and 25mm bars from All Audi for 5/8ths of FA. No more work to fit if everything is of the car but if you liked the Whiteline then that's the way to go again.

[4WheelDrifter]

I've not had much time for the S2 again this last week. I've had a few jobs to do to the other Audis. But here's a little update.

I've removed the ProConTen chassis brackets and the steering column cable, which combined weigh 5kg. So that's good news.
For now I'm just poking the seat belt cables into the footwells, as the car has to many parts in it to start dismantling more of the interior. I'll get rid of those later.

I've also painted the subframes. I'll try to get some pictures sometime, although they do just look like ordinary black subframes.

I'm also going to paint the RARB. Whiteline seem to think it's ok to powdercoat over rusty metal. After ~18 months of use it looks in a bad way. I'll paint that black too, as I didn't really like seeing a silver bar showing under the rear of the car. The RS2 FARB still looks in good shape.

[4WheelDrifter]

zinc primer

Thanks. I haven’t got any of that in the garage, so I’ll get some next weekend.

yeah. pm user andyp.

He found and used the guy successfully for OEM febi bomb iirc

Ah yes. I didn't see the outcome of this thread. Cheers.

It looks like I have the later type of bomb as the family album suggests and is also confirmed here by AndyP.


So I need the Febi 26538 bomb (4A0 612 061 D). Cheers Andys.

[volcano rs]

zinc primer

[4WheelDrifter]

Don't worry Mr RS I'll use a hacksaw first as you say. There will be a lot of metal filings sprayed about otherwise.
What's the best thing to paint the bare metal with? I've got some red oxide primer here, or some black Hammerite is a fairly close colour match.

Have you got to this yet? Planning on doing the same but no idea how easy it will be.

Getting rid of the steering column cable looks pretty easy. That would be a good start, as the last thing I want in a crash is dashboard and steering column wrecked on top of any other damage.
There are some fairly sturdy looking rusty brackets at the back of the engine bay, which the cables are attached to, they must weigh a bit.
The part I haven't investigated yet is where the cables go to the seat belt tensioners. Oh well, Looks like I'll be pulling more of the car apart.

[mcandmar]

I'm also looking at removing the ProConTen cables and associated stuff.

Have you got to this yet? Planning on doing the same but no idea how easy it will be.

Cheers,

Mark.

[volcano rs]

why not use a hack saw ?its a lot less messy .
then clean up with a gringing disc

[4WheelDrifter]

Funny you should say that, as that's exactly what I though when I stepped back and admired my handy work. Good job Sal's not here with his 12" disc cutter.
I've yet to take the disc cutter to my battery tray, damn thing. I'm still psycing myself up, despite taking the angle grinder to the S3 a couple of weeks ago.

[volcano rs]

hey stu when i saw your car in bits i thought i was in sal's garage and witnessing another being stripped