My 3B-AAN 400 HP project

[terrybullwon]

@Terrybullwon What eyes you have! Thank You for that! I will get rid off the oil and cleaning solution from my old filter now.
@URS4Boy The coils are 115R, I will fit them under a carbon cover from Aron and i found some small 12V ventilators wich i will mount them on top off each coil to blow some air on them.
Thanks For Replay!
All the best!
Eugen

Nothing to do with me...... seems that you have some very nice friends


Enjoy it !

[Pirvu Eugen]

@Terrybullwon What eyes you have! Thank You for that! I will get rid off the oil and cleaning solution from my old filter now.
@URS4Boy The coils are 115R, I will fit them under a carbon cover from Aron and i found some small 12V ventilators wich i will mount them on top off each coil to blow some air on them.
Thanks For Replay!
All the best!
Eugen

[UrS4boy]

Regarding the 1.8t coil pack conversion, check which version of the coil packs you got. Need to be 115 R or later. J or H = bad news, L = acceptable, > R = best.

That being said, these coil packs are still subject to failure from heat and more hp = heat. I am running 115 Ls on my RS2'd AAN (everything but the RS2 exhaust cam) and have lost one 115 L in two years. But I don't track the car. Some people who have been making big hp and tracking their cars have lost multiple 115 L (and some R) coils.

If you are serious about big hp, you should consider 034's high output coil system.

Dave F.

[terrybullwon]

I have seen that air filter before some where

Good luck with your project, i hope you enjoy doing it

[Pirvu Eugen]

Intercooler

[Pirvu Eugen]

1.8 turbo Coils.

[Pirvu Eugen]

rs2 MAF

[Pirvu Eugen]

scat rods

[Pirvu Eugen]

Spec 3 clutch

[Pirvu Eugen]

T3-T4 Turbo.

[jogi730]

Glad Santa has looked after at least one of us! hope parts are what you really need/want?
It seems you sow what you reap in this world. I understand from Chris (LHDKid) that you were most helpful to him and he was most grateful, so 2 decent Audi enthusiasts helping each other out big time.
Beginning to wonder what I did wrong in a previous life though?
Good luck with the project now and keep your thread full of pics and progress.
Cheers
Chris

[Pirvu Eugen]

Hello!
Santa has come a little late to me...but better then never!
So thank You LHDKid aka Santa for the big truck with GOOOODDD Stuff for my beauty!
I had a pleasent suprise finding between the boxes an package with a RS2 exhaust manifold with t3-t4 flange and no waste gate exit and the same intercooler from Jogi's old setup. So Thank You Chris for these parts! I realy whant to reproduce how much i can your old setup.
Thank You Nononsense for being so kind and patient with me!
The project will start as soon as posible because i have promised to 4wheel drifter that i try to start the car before him to see iff i will have smoke coming out off the ECU or not.
Till now i have:
Scat rods
Spec3 clutch
lower cr head gasket
Thank You Joe
RS2 exhaust manifold
Intercooler
Thank You Chris (Jogi730) Nice suprise!
RS2 bearings
Skimed pistons as Audiman has done
AAN ECU
1.8T Coils with plugs for the conversion.
RS2 MAF
7A cams (dont know iff i will use them)
Injectors
FPR
New T3-T4 Hybrid Turbo with internal Waste gate
Thank You Chris (LHDKid)
Pictures will follow.