Non-Stop 3b upgrade

[Rocco]

about the DV...who knows... it seems to be Ok but... it is the BIG DV from Dhalback Racing.

if the rebuilding job in the wastegate does not fix the problem,then i will buy another new big DV

[Rocco]

buy a set of yokohama parada, same size like current. you can feel the difference on dry road. i made 1.6sec 60 feet with them.

and what about 235 wide federal RSR semi slicks? they are at very nice price now


thanks for the info mate¡

[Rocco]

Your conclusion about the wastegate is completely wrong.
If it was too small boost would go out of control and too high, and not go down.

Your problem is most likely a sticking dump valve or sticking wastegate.
Also, I believe you mentioned problems with the ECU, which can be an issue too...

can be.... tomorrow i will receive the other RS4 MAF modified ECU...and i will test it.

today is happening the same... if i touch the ecu with a dry hit with a finger,the cars gets stopped ,and again turn ON ignition and running the same.


OK,then my wastegate must be old and tired...and the gas pushes it through the valve.

i had to rebuilt my old wastegate in my old 3B engine...and now this one.... i will try then...60€ is very cheap for a new wastegate.

i understand you, now enough flowing wastegate will means full boost without control


thanks Dmitri

[aronmatic2]

buy a set of yokohama parada, same size like current. you can feel the difference on dry road. i made 1.6sec 60 feet with them.

[prj]

Your conclusion about the wastegate is completely wrong.
If it was too small boost would go out of control and too high, and not go down.

Your problem is most likely a sticking dump valve or sticking wastegate.
Also, I believe you mentioned problems with the ECU, which can be an issue too...

[Rocco]

well, i was spending 1 hour doing test with my S2...and it took quietly 30€ of 98 fuel


i was at my town´s industrial area...a small road without traffic.

i noticed that my car loses traction in third gear by around 5000Rpm and around 120km/h, loosing the traction for a fraction of time ,enough to make you thinking "WTF¡¡" a little scare yes... tarmac was dry and the steering wheel completely straight¡¡

so having the car with a good suspension,powerflex bushes and solid engine,box and diff mounts ...i think that the weak point now are the tires ..... a very good condition 225/40/18" Goodyear eagles F1 asimmetrics 2.....

so guys,have you ever had the same issue with your High power cars? i may need to buy semi slicks or higher quality normal tires? also wider than 225 ?


thought the tests and launches always from second gear or higher i also noticed that i have to rebuild OR buy a bigger wastegate...... because in higher gears where the engine flow is very high it cant hold the boost when i try to shift from 3 gear redline to 4th gear.... then the boost is mechanical,just the boost that your spring gives you (0.4Bar stock one or 0.9bar the harder)

when i see it, i just leave the thorttle for an instant,then WOT again and 2.2 bar again as it should.

for the moment the problem is only when shifting hard in higher gears from 3 to 4 or higher. also the screamer pipe does not sound the same as it does when it holds the boost in lower gears.....

but another example....if i try to boost the car since 2000RPm in 4th gear... the wastegate holds the boost quietly¡ so it seems the problem appears when you try to shif hard to redline or near (high boost and flow) to another.... if you boost from almost stop...then it holds nicelly.

so i need to rebuilt it for 60€ and maybe a little of porting job..... OR directly buy an aftermarket one ready for more flow.


BTW, the car is very funny to drive ¡¡

[BLAMM0]

Awesome sound !!!

[Simons]

Rocco, looks like you forgot to refit your rear cambelt cover.
I have done that before too makes it difficult to bolt the top over back on too.

It hasn't mate

[Simons]

Car sent!!

[Rocco]

and this is how it pulls "only" to 6100 Rpm

get ready a good audio system or headphones

http://s1091.photobucket.com/albums/i390/SpanishRocco/?action=view&current=thenoise3.mp4

http://s1091.photobucket.com/albums/i390/SpanishRocco/?action=view&current=thenoise.mp4

[Rocco]

well, the car is almost 99% ready

the car pulls like a train but i have to solve one issue with VSS to can run the car normally to 7600Rpm because now without VSS and LC feature in the chips the car cuts rev limit by 6100Rpm

also is running with aquamist hfs3 75% water and 25% meth but only as a cooler because i have not custom mapping for it

[s2_bo]

Rocco, looks like you forgot to refit your rear cambelt cover.
I have done that before too makes it difficult to bolt the top over back on too.

[Rocco]

Any progress Tomas? Cheers!

A little...

Cambelt servicing and Wagner ic installation


And still finishing SLC and aquamist systems

[CoCaine]

Any progress Tomas? Cheers!

[quattrostyle]

do you know those tresers?

yeah almost forgot you bought them from me