sjw185 aby to rs2

[madpugger]

Nice work

Coming along well....

[sjw185]

Just curious,
I am busy also with a RS setup, but i need the car for daily drive at the moment.
So i do the clutch and a lighter flywheel first , and putting a RS IC on the car.
Then waiting for the other stuff.

Nice stuff you have indeed!

cheers

Was quite pleased how my intercooler turned out test fitted the bumper today everthing working in nicely.
Got the oil topped up and cranked the engine with the injectors off to get the oil flowing. finished fitting hoses and wgfv.
Going to fire it up tomorrow

[king]

Because I was just going to be using the car without injectors for a while until I can get the remap done was going to leave the fuel pump till remap time what would you recomend?

On the clutch/flywheel was looking to remove engine as winter project so can maybe look at things then.

Like a kid in a sweetie shop at the moment with stuff I want need

Just curious,
I am busy also with a RS setup, but i need the car for daily drive at the moment.
So i do the clutch and a lighter flywheel first , and putting a RS IC on the car.
Then waiting for the other stuff.

Nice stuff you have indeed!

[sjw185]

I am home a week Tuesday so I can arrange to meet you in town Tuesday...

Nice will send you a pm

cheers

[sjw185]

What about the clutch, flywheel en feulpump?
Are you gonna do that to?

Because I was just going to be using the car without injectors for a while until I can get the remap done was going to leave the fuel pump till remap time what would you recomend?

On the clutch/flywheel was looking to remove engine as winter project so can maybe look at things then.

Like a kid in a sweetie shop at the moment with stuff I want need

[madpugger]

I am home a week Tuesday so I can arrange to meet you in town Tuesday...

[sjw185]

Steve, I can show you my Supersprint DP if you like, but would be in a little over a week....

Im offshore a week on wednesday so if your about before that I would fancy a look

[madpugger]

Steve, I can show you my Supersprint DP if you like, but would be in a little over a week....

[king]

What about the clutch, flywheel en feulpump?
Are you gonna do that to?

[sjw185]

spanner link

http://cgi.ebay.co.uk/5-piece-S-SHAP...1%7C240%3A1318

[sjw185]

I thought I recognised those injectors!! Looking good, and where did you get that downpipe spanner from? I replaced the flexi-pipe nuts 'n bolts and cant get those back 12mm nuts to save my life

Should have got hold of an RS2 EM while the engine was out... perhaps for the future :mischeif:

Keep updating, your engine bay looks alot like mine atm!

Yea thanks for them
The spanners are from ebay for about a tenner a set just had the grind the rings a bit smaller and they work a treat.
Got a little facom 1/4 ratchet that was good with a extention bar for the waste gate flexi bolts got it in above downpipe then a 12mm spanner on the nuts

cheers

[Ross]

I thought I recognised those injectors!! Looking good, and where did you get that downpipe spanner from? I replaced the flexi-pipe nuts 'n bolts and cant get those back 12mm nuts to save my life

Should have got hold of an RS2 EM while the engine was out... perhaps for the future :mischeif:

Keep updating, your engine bay looks alot like mine atm!

[sjw185]

Cheers Sonic, Been looking at exhausts mine is in poor shape not sure what to do?
Like the look and price of the supersprint downpipe then custom the rest

[Sonic]

Coming along nicely

[sjw185]

more photos