Still no turbo?
Palma RS2 450-500hp
Collapse
X
-
Well I have had a lot of hold ups with shipping, I finally have most bits now
Photo of the Bad boy in place
IMG_0587.jpg
IMG_0586.jpg
IMG_0588.jpg
Big cold side compressor 58
.63ar hotside very small hot side housing, I will need to use a 10mm spacer between turbo & manifoldRS 2 580HPComment
-
indeed! the .63AR is quite small. Also it seems that the turbine wheel is protruding quite a bit! weird!
Do you think that the .63AR will be a problem jade(for the EGT's that is)
Also did you order the cold side with anti surge, or normal 4inch?Comment
-
.63AR is what Justin recommend for early spool
Normal 4" coverRS 2 580HPComment
-
Comment
-
I heard an interesting thing about non-water cooled turbos. Basically it was that having coolant go through the turbo did little for the turbo, but instead heated up the coolant and rest of the engine by quite a bit unnecessarily. Supposedly this was from Lindsey Racing, an outfit here that does Porsches, particularly 951's. I didn't see anything about that on their website, however. It was an interesting concept, I thought.Kenneth
1990 Coupe quattro
1991 200q20v x 2
1985 4ksq 20vt project
1986 Coupe GT 10vt project
2006 Honda Ridgeline
1998 Honda VFR800FIComment
Comment