My Audi S2 600Hp+ project 56k warning

[chipsenter]

This is how it will sound with the CT67 Turbo
My friends Winter track Audi .

Volume UP !

http://www.youtube.com/watch?v=aZCByvGNlK8&NR=1

[terrybullwon]

Aero catches fitted

Also found out that my gear linkage was rubbing on a 90deg -3 hose on the slave cylinder. So i changed it to a Banjo £30 lighter

[Bram]

Looking good chef, even high up it's feet. Probably going to see it high up front anyway when you launch it at the drag track

[terrybullwon]

Keeping the dream alive.......


So far i have sprayed the inside white, with no rubber flooring left (about 15kg)
welded in a anti lag micro switch under the clutch peddle. started to make a turbo brace.

Welded the bucket seats in.

[Puglife]

Ooh yeah..... It sounds ****ing awsome!!!!!!!!!

Vids or STFU Seriously james I'm excited to see the car all done Blood sweat and tears borther

[Rocco]

James¡¡

it is reliable and good install two EGT sensors in the turbo hotside??

one for example for the Aftermarket that you have and the other one for use it in a gauge...


and...it is better fit in in the exhaust manifold?? or the reads will not be ood??

[smiler]

Ooh yeah..... It sounds ****ing awsome!!!!!!!!!

[terrybullwon]

Ooh yeah..... It sounds ****ing awsome!!!!!!!!!

[terrybullwon]

Just got back from running the car up. Getting ready for a drive Sunday! Lamba is still high I will sort this out tonight after more work

[repo]

No antilag

[Jonnybravo]

Anti Lag ?

[terrybullwon]

1 bar @ idle ?

Yes neutral gear

[Jonnybravo]

1 bar @ idle ?

[terrybullwon]

Good luck to you Alex!

Repo I hope I can make that pretty easy!

[repo]

Repo just mapped another engine very much the same as mine and at half throttle it had 1bar on idle.

Not exactly idle, but neutral. Which I bet You ment...

e: Here's a goal for You, this was less than 2bar and suffered from lack of spark power. You can see the power going up and down because of misfiring...