My Audi S2 600Hp+ project 56k warning

[prosty]

You don't even need a clamp there just the hose, it's just suction not any pressure at all, but ofc you should always have a clamp there, if you weld it to the intake pipe, servicing will be a PITA.
Just go with a silicone straight connector the same color as everything else under the bonnet to match. It will be fine. I promise

[G60Rallye]

Nice looking progress, great to see you are doing so much of it yourself!

That blue focus is Andrew Gallachers car and I am pretty sure he made it himself didn't he Jonnybravo?

[dubmeister]

Its only vacuum there so its not going to blow off is it.

TURBOS SUCK!!!!!

[newsh]

Its only vacuum there so its not going to blow off is it.

[terrybullwon]

did you understand what i said @ the airfilter?

Yep

[lind4hl]

did you understand what i said @ the airfilter?

[terrybullwon]

nice work mate did you weld the ally yourself?

could you use a v-band on the intake side?

I am having lessons

Its bloody hard to start getting there now, lind4hl gave me a few tips to.

i think i will just weld it, need to stop spending money and drive

[lind4hl]

nice work mate did you weld the ally yourself?

could you use a v-band on the intake side?

[Error404]

nice work mate did you weld the ally yourself?

could you use a v-band on the intake side?

[lind4hl]

weld it, that is fine!

[terrybullwon]

Welds looking pretty good there

but what the hell have you done with the bend @ turbo????

are you going to weld anything more there? or a wiggins maybe?

Doubt i will use a wiggins, I think i will just weld it Monday

[lind4hl]

saw now.. you cant use a silicon piece there.. it will blow loose in seconds.

also, at the mushroom filter, do a weld 5mm from the edge so you get an higher edge that holds the clamp back, got it?

[lind4hl]

Welds looking pretty good there

but what the hell have you done with the bend @ turbo????

are you going to weld anything more there? or a wiggins maybe?

[terrybullwon]

[terrybullwon]

what am i telling you James?? pictures,pictures!!

Just for you mate