The track slag project

[trackslag]

http://www.demon-tweeks.co.uk/Store/Home

adjustable RARB. I'll try and dig out the invoice for mine. was about £150 IIRC and comes with new poly bushes

was it this one you have? the arb code on the page could you check it with your is yours a coupe?

[PeteUr]

before ordering from demon tweeks take a look at previous threads on here or speak to some members like jamo. Be prepared for a very very long wait from them

[Error404]

save yourself some cash and a long wait - do the FARB on the rear mod

[PeteUr]

save yourself some cash and a long wait - do the FARB on the rear mod

You got that on yours mate? your have to take me out sometime to see what its like as I may be tempted.

[trackslag]

save yourself some cash and a long wait - do the FARB on the rear mod

Tell me more???????????????????????
was looking at my farb today and it makes rear one look like a joke

[Error404]

have a look in the suspension stickies section mate - big thread on it and a few options depending on what you're after

[Tonks4x4]

yes it 300mm disc machined down to 280mm, s8 calipers, urs4/s6 calipers and handbrake fitted no mods, easy no messing. I bedded them in and much much better than stock, which i seemed to cook every time i drove my s2.

Please do me a favour and send me the part number for the discs... I have the URS4/S6 calipers, but don't seem to be able to get the right discs... I keep getting the wrong hat height...

[trackslag]

Please do me a favour and send me the part number for the discs... I have the URS4/S6 calipers, but don't seem to be able to get the right discs... I keep getting the wrong hat height...

i used B7 Discs 300x22 vented - 8E0 615 601R and had them milled down to 280mm cant buy them off the shelf at 280mm. And Got to use S8 carriers - 4D0 615 425C

[trackslag]

A couple of pics of the cage only painted in undercoat at the mo.

001.jpg

002.jpg

[terrybullwon]

Where did you get your bends from for the cage dude?

[Big Lee M]

That's one hell of a cage you got there. Nice work buddy can't wait to see the finished results.

[trackslag]

Where did you get your bends from for the cage dude?

had it made they use a pipe bender, so all tubes are one piece

[terrybullwon]

had it made they use a pipe bender, so all tubes are one piece

Ah...... i thought you had done it

Looks good who's work is it and was it a arm and a leg? I was quoted £3k with V&T

[trackslag]

Ah...... i thought you had done it

Looks good who's work is it and was it a arm and a leg? I was quoted £3k with V&T

I think roll cages are best left to people who know what they are doing, I could never get it that neat. Was around 2K with new front window was done at xsportracing

[trackslag]

just had the S2`s new home finished so work can start again when my hand is better.

Before

018.JPG

After

010.JPG

011.JPG

014.JPG

No more working on the drive way in the f**king rain, snow and wind!!!!!!!!