My 3B to RS2 project

[newsh]

Pete Berry did the cambelt for me. I got lucky in the bottom pulley, this had been broken for a long time

Replaced with a Terrybullwon chrome steel version.

[newsh]

Ahha so you have solved the on-going issues you were having with it?

I reckon so, the random pinging seems to have gone

[Error404]

Ahha so you have solved the on-going issues you were having with it?

[newsh]

Just a quick update, I have to report that since I relayed the fuel pump direct from the battery this old car is pulling like a train.

[newsh]

The coupe just about sailed through the MOT, only issue was a broken boot retainer in one of the plastic droplinks I fitted for the MOT last year.. and a rear tyre (I supplied a spare one I had in the shed)
While she was in there I also asked the Garage to do a 4 wheel alignment (first time since fitting the KWs) and she steers very nicely now.

[Error404]

I know the feeling! /no touched mine since January

[newsh]

My 3B to RS2 project

I've had it running on the Maxxecu but swapped it back till I can get it mapped.
I bought all the books you suggested and had a read but no time to play really..

[Error404]

Cool.
It's on my jobs list that I've not go round to yet
When are you fitting the Maxx ECU?

[newsh]

Did you go for 2.5mm? Can't quite see from the pics. Have you still got the battery up front mate?

Yes, 2.5
Battery under rear seat now [emoji106]

[Error404]

Did you go for 2.5mm? Can't quite see from the pics. Have you still got the battery up front mate?

[newsh]

My 3B to RS2 project

I think you're supposed to connect the wires up to a relay mate

to you too [emoji12]

See how fat those wires are though eh?

[Error404]

I think you're supposed to connect the wires up to a relay mate

[newsh]

Relayed my fuel pump

[newsh]

Finally found my phantom water leak, been bothering me for a while as I kept wondering if the head gasket was going..
Turned out to be the heater pipe take-off on the back of the block.




I contacted Andy and he sent me over one of his K24R anodised spigots. Job done and no more leak.

[newsh]

Cool. Must admit I am considering the Maxx ECU

Well I've been spending a bit of time with Ish and his boys and I've been seduced..