Did I guess wheel size correctly? What size tyre are you going to use?
look what i found in my yard!
Collapse
X
-
-
Those are 9JX16 ET15.
The tires will be 225...but the height....don't know yet.
We have to measure first...is coming very close to the steering arm without spacer.
I will let you know.
Glad you like them.Comment
-
Finaly...the car is on it's wheels!! The tyres are 225/50/16.
The wires are in the car....still, the wire terminals ordered are not yet here.
I have started to work at the dshboard...pictures to folow.
The car sits verry nice now. Dont know how will be after the engine will be in.
For the moment only the running gear is in.
Hope you like'it!
Regards!
EugenComment
-
little update....
The dashboard is ready! and the entire wiring now!Comment
-
and on the car!Comment
-
Question.... what impact will have on the ECU...if, all the time..after swiching off the engine...the power for the entire car is cut off?
About adaptive mixture and so on...
I can leave the car like this...with a main switch to cut the power to all circuits..or i should leave the fuse 28 on the battery side all the time?
Thank you!
Regards!
EugenComment
-
time for little update....
Engine has started!!! God Bless!!!
All the systems are running fine. I am happy!!
Pictures will follow!
About the main switch...i left the ECU connected to the battery all the time for the adaptive mixture etc.... and the rest through that main switch...
I used Castrol Magnatec 10W40 for the running in...
Hope is ok!
I will asq Oil man also about this.Comment
-
Wow, this is looking great!
Comment
-
few pictures from the night we started the engine.
I made few movies also..but are in MP4 format....i will try to find an video convertor to be able to post them here.Comment
-
It is not good to have ECU without power for one reason... It will clear fault codes every time, so it will make the car hard to diagnose.
You made the correct decision.Comment
-
pictures from today! The car is now registered and running fine...the rear right caliper si sticking though...i will dismantle and check what is wrong there..but..is ok.
Hope you like!Attached Files- IMG_4459.jpg (132.0 KB, 69 views)
- IMG_4461.jpg (132.3 KB, 62 views)
- IMG_4462.jpg (132.8 KB, 59 views)
- IMG_4464.jpg (118.2 KB, 54 views)
- IMG_4465.jpg (122.0 KB, 49 views)
- IMG_4466.jpg (141.1 KB, 44 views)
- IMG_4467.jpg (106.6 KB, 35 views)
- IMG_4468.jpg (85.7 KB, 39 views)
- IMG_4470.jpg (86.8 KB, 35 views)
- IMG_4471.jpg (135.0 KB, 41 views)
Comment
-
-
The only thing left now is to give it to me =)Comment
-
...i cant give to you because is not mine...i have just done the work.
Dont know what the owner will do though...
We will start now another project...for an short wheelbase sport.
I will let you know.
All the best!
Comment
-
I like LWB SQ's.
Comment