AAN Buggy

[caterpillar]

nice little buggy.........!! link to the videos please

[Jamo]

I've merged these threads into one project thread

[Stefen]

Thanks for merging these threads.

Here is a playlist from the Nutts Corner Trackday on YouTube:

http://www.youtube.com/playlist?list=PLE8855814EEB04668&feature=plcp

There also is a odd video lurking around that channel for those if you that want to see every bit of bad driving that day!

She weighs 725Kg, but with the alu uprights and calipers, along with the smaller shocks and reworked back end with lighter steel (and less of it), she may weigh in around 700Kg.

We haven't got an LSD yet. The two options are to use a Porsche 968 one, or fit an A4box and buy a Quaife. We aren't sure if the A4 box will fit or not though.

[Stefen]

[Bram]

you need wheel spacers

[Stefen]

Frame is progressing, reworked wastegate pipe, anti roll bar fitting in progress.

[martinws]

Looking really good. Are the drive shafts standard length or did you make the suspension first then cut n shut the shafts afterwards?

Keep up the madness!

[Stefen]

The standard drive shafts are a little short. In hindsight more attention should have been paid to ensuring that the suspension suited the shafts. Now we're going to cut and shut longer shafts. Doh!

[Kieron20V]

How much too short are they? wouldnt it be better to turn some spacers to go between the inner cvs and drive flanges?

[Stefen]

Yes, but unfortunately the chassis runs close to the inner joints. The options are:

1) Lengthen the drive shafts
2) Modify the chassis and add spacers
3) Raise the gearbox (over the top of the chassis) and add spacers

We'll have to have another look at it to see what the best route is.

[Stefen]

Photos taken with crappy camera phone:

[Stefen]

[Bram]

awesome!

[Greg_S]

Excellent work, whats the next list of jobs?

[Stefen]

Testing!

Available up to 1080p HD

http://www.youtube.com/watch?v=37m8J232Usw