s2 xxxhp 90% ready

[Sweeper]

Aron: is it me or you showed the welding crack with your middle finger ?

[aronmatic2]

great work aron!!! enjoy the beast!

thank you.
i will


I have a problem. i have a little oil leak from the head gasket at shows the picture.
maybe somebody have any experience with this config.
7a head(water collector drilled, main water hole filled in circle)
tdi head gasket(drilled oil holes like 3b head gasket)
10v turbo kg block
i hope only something was under the gasket. no any major fault.

[A80Avant]

great work aron!!! enjoy the beast!

[aronmatic2]

we will see after final remap.
the alu welding guy will finish the IM on monday.
the software tuner have to check everything at thuesday
and gooooooooooooooooooooooooooo

[revoth]

Looks great, Aron. Woahh really cool.

And the turbo starts really at 2800 upm?? Ok the hacke im makes their part to this good, but I have heard from a big lag at the gt30r where it starts first time hard kicking at 4000 upm. Or it this only a mapping thing??

Greez

Marco

[aronmatic2]

Finaly everything on the right place.
bumper, carbon hood installed.


Well done.

[aronmatic2]

I tryed the car on road. I want to go the first 1500km on 1.1 bar boost and after remap to 1.9 or 2.1. The turbo start to kick from 2800. on 3000 rpm i had 1 bar. I am very happy to drive. The car has only one problem. The IM is cracked on the welding. Not a big deal,but make me so angry because not the first problem with the most expensive part of my car. My idea: we have to put 3 strating bar inside the IM.

I feel much better anyway.

[aronmatic2]

i have 76mm compressor wheel. around 500hp or less.

[revoth]

@Aron

what's the powe output of the GT3071R with the sq em on your car. It has a #8 hotside, right??

Greez

Marco

[MidnightBlueS2]

Thanx PNanassy !!!

[aronmatic2]

i converted the video to 6 mega and here one more:

http://ajtodepo.hu/start1.mpg

http://ajtodepo.hu/start2.mpg

[aronmatic2]

Arons ecu needs a little remap so it starts easyer,and runs smoother under warmup.

Yes. need to check this program anyway. couple parts changed since this program has wrote.
next week.

[pnanassy]

Arons ecu needs a little remap so it starts easyer,and runs smoother under warmup.

[MidnightBlueS2]

English please or at least run it thru a translator so we can have a general idea of what you're saying. Thanx!

[pnanassy]

Aron, ha ilyen szarul indul hidegen az nem fog megváltozni magatol,persze mikor mar bemelegedett ok,de a hideginditason programozni kell kulonben ilyen szarul fog indulni hidegen mindig.