Projekt Alpinweiss IV Part II - 350 bhp

[Rusty]

I have 5mm, 10mm and 15mm available

The wheels are 17x8 ET35 with 225/45R17 track rubber front and rear (Yoko AD08 7 Pirelli PZero Corsa), with the fronts au naturel and the rears running a 5mm spacer to balance the looks. I bought the 15mm items to run with the OE Avus but may even go to 20mm, if they look a bit inboard when I go back to the winter wheels.

I also have some rubber spring assistors to try on the rear, to 'stance' it up a bit. If it looks good, I'll get some HnR Avant front springs to add extra stiffness and height over the HnR Coupe rear items and maybe drop the RARB size a little to prevent inner wheel lift under hard & tight cornering.

[Error404]

Thought you were using the 15mm ones?

FWIW I run 12mm rear spacers on mine to balance the track width front to rear

[Rusty]

I think I'm going to up the rear spacers to 10mm, still looks a bit slim-jim.

[Error404]

Looking very clean mate

[Rusty]

Cheers chaps

Not going to the RR day Steve

[SteveH]

Nice one Andy! Are you going to the RR day at MRC?

[andy10v]

Looks lovely!

[Christophski]

Very nice....

[Rusty]

Just took some pictures in the sun

[Rusty]

Stock turbo, IM and injectors, Wagner EVO EM and a 3" turbo back exhaust.

[mcandmar]

Only seen this thread now, nice work Was the turbo a stock 7200 or tweaked in any way?

[andy10v]

Thanks for the info.

[prj]

Thomas Schmalz tuning... or the software you find in Ultimot chipsets

Which are also stolen from him, he never authorized the sale of them by Ultimot.
In fact all the chips that Ultimot sells are nicked.

He confirmed this in writing

[Avantus]

Thomas Schmalz tuning... or the software you find in Ultimot chipsets

[andy10v]

Glad to hear you have got the emissions sorted, always a worry when they are high.

T+S

T+S?