Audi 90q type85 10vt Project

[Spidey]

Great project! Same wheels as mine. R16? Mine are all polished.

http://s22.postimg.org/vp6zj6apd/image.jpg

Homemade coils?

[Jelle..]

Nice wheels! Do you have a photo from them under the urq?
The coilovers were made by QuattroManufaktur GmbH, but i think they send them to FK.

[Kiku]

How did you managed to use 288 disc with g60's and what disc is it?

And front you will drill new holes for those 328 discs?

[Jelle..]

No it will not fit because the offset of the disc.
So I think I need to go for a 2-piece disc setup, front and back.

I saw the 2bennett top mounts, has somebody experience with these?

[simon20vq]

Missed this but great looking car. Always wanted one.

[Jelle..]

Some more parts i bought;

*Bosch 044 fuelpump
*Fuel filter stainless steel
*Fuel rail profile
*PTFE braided stainless steel fuel lines (AN8/AN6).
*AN fittingen PTFE
*Hydraulic handbrake
*Fittings for installation of the handbrake.
*Wilwood Brake Proportioning Valve


And the alu 034 7a flywheel (+/- 4kg) which I already have for a while.
Also bought a set Bosch EV14 870cc injectors.

Eventually i get all the parts together, but it take a while.

[quattro-nick]

nice project !
what standalone ecu are you going to use?
i have vems for my b2 20vt,works great

[Jelle..]

I'm going probably for vems because i live nearby a vems tuner. The following tuner nearby uses KMS, but i thinks vems is the better choice because it is more used worldwide and so more support.
The problem that i can't map the car by myself so the tuner is the most important factor.


Sorry for my bad english

[V6quattro]

Vems tuner would not by a problem if you live in Holland

[Jelle..]

I live close to DP-engineering so thats not a problem.

[quattro-nick]

I had phoned with those guys
the problem is that they dont have a 4x4 dyno so if you want they make an appointment with a colleague tuner that has one 4x4 dyno
or you can changes gearbox to 2wd

[V6quattro]

I always chance my car to 2wd. Just place a welded torsen diff and remove the drive shaft. It's worth it.

[quattro-nick]

to much work
do you have solved your oilpressure problem yet?

[V6quattro]

to much work
do you have solved your oilpressure problem yet?

Did a lot on my car this winter and still fixing some small issues. Hope to do some tests soon!

[Val]

I always chance my car to 2wd. Just place a welded torsen diff and remove the drive shaft. It's worth it.

Faster would be to engage center diff lock and just take off the propshaft.