saloon S2

[audinut]

whats the best base car to do a conversion

1992 Audi 80 2.8 E QUATTRO any good?

[Rocco]

Audi 80 competition

[audinut]

ah ok any reason its the best choice ... completely stabbing in the dark here

[UrS4boy]

whats the best base car to do a conversion
1992 Audi 80 2.8 E QUATTRO any good?

Seeing as the S2 saloons were all B4 cars, shouldn't you start with a B4 saloon, i.e. a 93 Model year and newer 8C2 vehicle?

[targus]

b4 16v quattro is easiest

[audinut]

Seeing as the S2 saloons were all B4 cars, shouldn't you start with a B4 saloon, i.e. a 93 Model year and newer 8C2 vehicle?

thats just why i put the post up to see which vehicle makes the best start point - so thanks for the info

[UrS4boy]

b4 16v quattro is easiest

What about with the 5 cylinder NG 98kW engine or was that only front wheel drive (or cabriolet)?

[V6quattro]

Seeing as the S2 saloons were all B4 cars, shouldn't you start with a B4 saloon, i.e. a 93 Model year and newer 8C2 vehicle?

All the V6 (2.6 and 2.8) are B4 cars.

[UrS4boy]

All the V6 (2.6 and 2.8) are B4 cars.

True but not all the 93-96 B4s are V6s.

[shaun5]

If we are talking about a British car, the best car would be a B4 80 16v quattro (i believe the engine mounts are the same as a 5 cylinder) You could get B4 80 2.3E quattro abroard so thats the best but LHD only.
If you are looking for a car ive got a 80 2.6 quattro 1995

[hermanio]

Best car will be the 80 quattro b4 2.3 ng, it has the engine mounts and the radiator mounts in the right place. The 80 competiton also has the engine mounts in the right place but you need to change the radiator mount. But i think the 80 competition is easier to find then the 80 quattro 2.3 ng

[Rocco]

Also count the dash wiring.... If you install a 5 pot engine in a 4/6 pot base car the Speedo will not work correctly.

The rpms I mean,not sure about the speed.

[Kieron20V]

Also count the dash wiring.... If you install a 5 pot engine in a 4/6 pot base car the Speedo will not work correctly.

The rpms I mean,not sure about the speed.

Thats not a wiring issue, if you use clocks from an S2 or any 5 cylinder it will read fine.

[audinut]

ok so you dont need an s2 interior loom?

[Classix]

I can sell my compi with rs2 parts what`s be easer way to get s2 saloon or rs2 saloon