Audi S2 - 395HP project done

[diogocartier]

Guys I have some news...

I have this car for 14month and it was stock until the last week.
During the last 3 months I used it for only 200km.

During this months I have replaced both knock sensors, 2 coils and aircon compressor.

Beside these issues, it was only good things.

On brakes I'm using the brake lines from Hell (Aeroquip), Red EBC Pads.


During the last week I did the following mods on the car.

3" Exhaust system without CAT
Silicon hose from Roose
K24-7200 de RS2
Unichip Q+
Fuel Nozzles - 660cc
New N75
DV from Forge
Vacuum lines

The result is 395HP & 51Nm of torque





Rgds,

Diogo.

[Drummer87]

Good work

Lets see under the covers also where did you buy your cover from??

[UrS4boy]

What wheel hp to crank hp correction factor did you choose?

Something seems very wrong with those graphs. Torque should drop as HP increases.

A tuned AAN (similar to ABY and ADU) dyno result:



Another one:



Yours:

[bluequattro]

What was base engine spec to start with?
Im/em and intercooler stock?

[Rocco]

I've never seem before any near hp with stock Rs2 turbo!

Please take off the cover and make some pictures

[VagOrBust]

Since Brazil is the worlds second largest Ethanol producer, I'm guessing he's not running on petrol anymore.

[diogocartier]

Guys,
I´m using petrol 99 octanes.
The intercooler, intake are stock, basically the hole engine is stock.
I´ll need to check which correction we used.

But the car is running pretty well, I´ll do a comparison with other cars..


I´ll let you know!

[Maniche]

Just waiting for the healthy comparisons

Good to see these numbers... Congrats!

[Rusty]

That graph doesn't show torque, it's just power and run-down losses with the two added together above

[Maniche]

BAU for dastek dynos...

[Matt5]

Maniche e Diogocartier bibas!

[Guslotti]

Did you change the ECU sensor pressure (250kpa to 300kpa)?

[Maniche]

Maniche e Diogocartier bibas!

Fala Biba!!!

Translate: Hello Fag!

[diogocartier]

Maniche e Matt5 = Bibas... hehehe

Did you change the ECU sensor pressure (250kpa to 300kpa)?

I'm not using the Map sensor anymore....