SQ LWB road car

[Simons]

it's a good project, but more expesive that I can afford...mine will be a little street car

[Simons]

Now with the wheels looks better, I fit the other rear wheel on the front to see the real distance between tyre and wheel arch, and I was thinking in lower it, like 2/3cm (I need to put the 20v engine before), I have a set of k.a.w springs unused who I bought 4 years ago for the s2 and I never fit due a main reason.... -6cm on the front and -5cm at the rear, It will looks better but I lose 6/5cm suspension movement and the shocks aren't for a lower spring kit, I read sometime ago that a tuner, maybe french on a red SQ, lower the subframes to low the car and keep the same suspension movement...Anyone knows something about this

















Now ready to start the other side

[jorge s2]

That's a very good job you're doing there mate , you're building the dream car of many of us. keep going.

[Simons]

[Simons]

A little bit progress, I reinforced the body, I did more than the photo, and when I fit the front wing a new problem appeared...the bonnet was bent, I cut the inner reinforcement and put fiberglass to make a new one with the correct angle, it isn't finish yet because I need to fit the grill and bumper to adjust al together

Also, before audi put out of the maket this strut brace I bough it, isn't best but works...also if you want, you can keep the batery on the stock position, the price 95€ aprox. here more info

http://www.kvquattro.com/techdocs/strutbraceB2.html

http://audi.humanspeakers.com/strut-brace-90.htm

[adam g]

Nice job, its starting to look like a car again. Looking forwrd to seeing it completed. Can I ask where you got the bonnet from and does it feel any lighter than the standard one.

[Simons]

Thanks, now I haven't got many time and sometimes rest your bones working on the project....it's hard

the seller walezy, much more lighter! an a half or less than original. I can't weigh it because the adjustment is good and it take sometime to manage it again

[Rocco]

get it finished soon mate !

i am impatient to try it,and will be happy to own you with my red rally car

[Simons]

I hope to finish

Mine it's lighter....the straight line is mine

you need to remove your luxury interior

[Simons]

More news, I was fighting with the kit and now I will start with the front, I don't have the orange turn signals, I found white and smoked ones on custom autocraft...but I would like to use the orange ones, anybody has a set for sale??

[Rocco]

I want mine too!

[quattrostyle]

Get started then

[Simons]

Today a little bit more, it's not finished yet...it's the first step

[Simons]

two photos for the photo album

[Simons]

Father & Son

the body isn't finish yet