Abt C5

[aronmatic2]

clean job slobodan

[zlobo]

Thanks Aron

[zlobo]

If only the days was longer....
today i managed to mount the fuel rail and injectors and i also made a heat cower over the filter



Got some disks from Johan that i am thinking off using 365x32mm from Rs4.

[zlobo]

some days ago i filed up the engine with glycol and water an yesterday i found a Small leak on the water pipe so i had to dismount everything and weld the pipe.
So this evening i managed to weld it and mount everything back i also mounted the fpr and a fuel line. this weekend i will probably make an new engine loom.

[DJ-ROY]

great work again Zlobo good luck with the engine loom

[s2_bo]

Yeah, looking really good. Hope the loom goes well and keep us posted...

[zlobo]

smal update. Nearly everything is on its place. i have started a bit with the loom.

I also got some bad news today the guy who builded my em died last night in a mc crach R.I.P Peter G.

[zlobo]

some pic on the engine loom.




not 100% finished with the loom. have to get some stuff to get it reddy.

[zlobo]

The ignition key cylinder broke down on Saturday when i was suppose to start :wtf: i had a lot of trouble replacing it had to drill a hole to get out the lock cylinder. and that i had to do with out removing the dash.


here is where i need to drill and i managed to do it with a dremel


here is the broken one, when i managed to remove it.


drilling on a donor one trying to find lock to push


found it and removed the lock

i also managed to start the engine for the first time today
here is a link to a Small avi clip click here or save as..

[zlobo]

The headlights is mounted also the ic.

This is the first time it leave garage in a long long time. Mapping will be made in the spring

[4WheelDrifter]

Wow. It runs. Or did you push it out of the garage Zlobo?

[zlobo]

Wow. It runs. Or did you push it out of the garage Zlobo?

Haahaha, No this time i drove it out. i have to do some modifications in the mapp to make it run good. but it's driverble.
I am runing on 98oct now and in the spring it will be mapped with E85.

I can put some smal movi clips so you can heear the engine running

[4WheelDrifter]

Haahaha, No this time i drove it out. i have to do some modifications in the mapp to make it run good. but it's driverble.
I am runing on 98oct now and in the spring it will be mapped with E85.

I can put some smal movi clips so you can heear the engine running

You know we like video clips here.

[zlobo]

Ok then, here you go looki lokki
i just puted that clip together sory about the bad sound quality in the beginning.

[DJ-ROY]

Happy for you