Bens Audi 80 track car project

[terrybullwon]

what's left to do before it goes on track James looking very good

Will you make it to ADI with this or your beast mate?

I doubt mine will be running i just dont have time working the btcc and the real job.
This one is a possible depends what happens in shake down.

@Micheal, rear shaft, rear windows, bleed brakes, test and dyno dampers

[Error404]

Cool hopefully see you there mate

[terrybullwon]

Took it for its first shake down today, track day is already booked for a few weeks time so we can really see whats it like

https://youtu.be/WuOv3RqJYd0

[NakSu]

Sounds and looks awesome ! Can't wait the track day

[terrybullwon]

Sounds and looks awesome ! Can't wait the track day

Thanks,

We made a few revisions before it went out.

Radiator with spal fans







Made up a throw out bearing face man enough for the clutch



Dampers full built and serviced before setting the car up a few days prior to taking it out yesterday. Ill do a set down and see whats change but i think its petty solid still.

[slacky]

superb , nice test road

[Newmember]

Hi! Nice Project you have there Can you tell me the part number of this release bearing or it is custom made?

[terrybullwon]

Hi! Nice Project you have there Can you tell me the part number of this release bearing or it is custom made?

Tilton bearing home made face

[gnutz2]

Great work

What pump(s) are you running for the rear rad? and remember if cooling is borderline then changing that rear rad will gain you 20% better cooling.

[terrybullwon]

Great work

What pump(s) are you running for the rear rad? and remember if cooling is borderline then changing that rear rad will gain you 20% better cooling.

Thanks Baz

It's on a 150 Craig pump with the internal one still there.

Water temps seem consistent at 84 according to the data

[gnutz2]

Thanks Baz

It's on a 150 Craig pump with the internal one still there.

Water temps seem consistent at 84 according to the data

Sounds very similar to my setup, l also kept the original pump to circulate water around the block whilst the engine is warming up and switch the elec pump on at around 75c, the fans never come in unless the car is stopped.

[terrybullwon]

Sounds very similar to my setup, l also kept the original pump to circulate water around the block whilst the engine is warming up and switch the elec pump on at around 75c, the fans never come in unless the car is stopped.

I think were see better results on track when its not so stop start with this

My car with the same set up but custom made rad can do multipul laps with out the fans coming on now. Its defiantly dependent on how efficient the rad is

[terrybullwon]

[terrybullwon]

This now has a MOT

Had to fit a race cat but its 100% legal

So we have gone from this to this

[Thuppu]

Everyday grandpa transformed to ultimate killing machine! Nice!!!