S6 2.2T 1996, Return of the dead S...

**Spyform** · 27 March 2019, 15:08

Then we made adapter for vacuum brake booster from audi A8 4.2 quattro.
It was painted also...

**Spyform** · 27 March 2019, 15:10

**Spyform** · 27 March 2019, 15:10

**Spyform** · 27 March 2019, 16:03

Then front calipers was prepared for sanding.

**Spyform** · 27 March 2019, 16:06

Then everything is assembled, this option was specifically to keep the original strut.

**Spyform** · 27 March 2019, 16:07

New brake cylinder, everything fell as in the original.

**Spyform** · 27 March 2019, 16:09

The ABS system has been removed completely, with the ability to restore everything back.

**Spyform** · 27 March 2019, 16:10

**Spyform** · 27 March 2019, 16:14

Then I began to think and decided that under the discs from the A8 310mm, the calipers from BMW are well suited. Measured and made of aluminum adapters for the caliper from the BMW E38 Brembo

**Spyform** · 27 March 2019, 16:15

**Spyform** · 27 March 2019, 16:16

**Spyform** · 27 March 2019, 16:17

Also due to the fact that the caliper is very wide, you will need a spacer of 25mm so that the disc does not cling to the caliper.

**Spyform** · 27 March 2019, 16:19

The front calipers were painted with powder and tried on.

**Rikki Kitto** · 27 March 2019, 16:32

Nice work fella

**Spyform** · 29 March 2019, 08:10

Originally posted by Rikki Kitto

Nice work fella

thnx bro

S6 2.2T 1996, Return of the dead S...

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment