Announcement

Collapse
No announcement yet.

Audi s2 1996 project

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Audi s2 1996 project

    Well hello guys !

    My name is Filip and live in Finland southern part.
    Sorry for the bad english.
    i am here to learn English/about s2

    Background info on the car:

    Imported from germany year 2000 to Sweden

    Stood still 2000-2008 (when the guy who imported it build on it)

    Imported from Sweden to Finland 2010 by my brother and he had a accident with the car spring 2015 and now 2016/02 i own it (I have only driven the Car 2-3 times and that was before the engine upgrades, so looking forward to getting it on the road again)

    This is how the Car looked when my brother imported it from sweden, kinda Pokémon looking with that color/rieger Body kit so this will change




    My brother rebuild 100% the engine in 2014 new engine have 1500-2000km before collision so dont have to worry about that

    ABY
    7A CAMS
    GTX3582 billett

    Wiseco pistons

    Eagle H-profile connecting rods

    KMS MD35 brain

    Head have been ported

    Furans intake

    Sachs 707

    Sinter

    The right side did get a little miss shaped after the accident
    Intercooler, right side headlight, right front wing, trunk window has to be replaced
    And the right rear wheel is not straight anymore so i have to figure out what all Things need to be replaced ( turned out the wishbone/guide joint did the trick)

    Pics will come

    goals is to get the car on the road by 201X (very expensive to repaint) repainted and good to go Street and some Circuit driving
    Last edited by Filip_FIN; 9th June 2017, 18:58. Reason: Info
    Project Audi s2 coupé 1996

    http://http://www.s2forum.com/forum/showthread.php?t=80796]

  • #2
    the car right now
    Last edited by Filip_FIN; 8th June 2016, 18:31.
    Project Audi s2 coupé 1996

    http://http://www.s2forum.com/forum/showthread.php?t=80796]

    Comment


    • #3
      You got any original photos Filip and it's a shame a 4 year old car stood still for so long?? Mileage must be pretty low?

      Comment


      • #4
        Nice one mate! Will be watching this! ))
        Audi S6 C4 2.2T Quattro 1997, full rebuild....
        Audi A5 Sportback V6 2.7 TDI 2011
        Volkswagen Phaeton V6 3.0 TDI 2009

        Comment


        • #5
          Been in contact with the swedish guy who imported the car from Germany and thats the guy who painted the car and put a ADU engine in it he said(and i have a somekind of receipt of an adu engine but i dont know). but now it's a ABY head atleast
          Diffrwnces on aby-->adu block /head ?

          the car did have 2 owners total in sweden i think and the guy my brother bought it from he was kinda strange and i think that he still have some parts for the car that he said he would send but did not-

          here is the car when the guy who my brother bought it from owned it

          http://www.garaget.org/?car=134708

          but he did not build the car

          no original pics it has been blue from factory ming Blue i belive

          97XXXkm it is on the gauge

          The guy who imported it to sweden sand blasted all the parts subframes , wishbones , Engine partsand and so on ,

          He also painted the car in lambo orange abit to much Pokémon Color in my opinion
          Last edited by Filip_FIN; 9th June 2017, 19:00.
          Project Audi s2 coupé 1996

          http://http://www.s2forum.com/forum/showthread.php?t=80796]

          Comment


          • #6
            Editedit
            Last edited by Filip_FIN; 12th September 2016, 19:01.
            Project Audi s2 coupé 1996

            http://http://www.s2forum.com/forum/showthread.php?t=80796]

            Comment


            • #7
              The subframes can move, only one of the bolts is fixed, the other 3 are floating captive nuts, so might be worth checking if the wishbone doesn't fix it.

              Good luck with the project.

              Comment


              • #8
                Check to see if the rear balljoint has slipped/moved on the wishbone
                1991 S2 3B Coupe, KW v1, solid sub frames, poly bushed, chipped, about 260 ish

                Comment


                • #9
                  Originally posted by stocious View Post
                  Check to see if the rear balljoint has slipped/moved on the wishbone
                  Hello

                  I have taken the wishbone of the car but did not see anything special but have not been in garage for some time so dont remember have to go and look at it all again thanks for answer
                  Last edited by Filip_FIN; 14th March 2017, 05:12.
                  Project Audi s2 coupé 1996

                  http://http://www.s2forum.com/forum/showthread.php?t=80796]

                  Comment


                  • #10
                    Nice color. I follow with interest this. Good luck with your project!

                    Comment


                    • #11
                      Originally posted by Settari View Post
                      Nice color. I follow with interest this. Good luck with your project!
                      Thanks !
                      i dont like the Color so much hehe

                      If everything goes as planned it will be repainted (nimbus Grey)
                      At some point
                      Project Audi s2 coupé 1996

                      http://http://www.s2forum.com/forum/showthread.php?t=80796]

                      Comment


                      • #12
                        a little more pics of the car

                        anyone knows what theese cables are? found in the boot..?

                        rest of the car (interior and spare parts

                        Last edited by Filip_FIN; 12th September 2016, 19:03.
                        Project Audi s2 coupé 1996

                        http://http://www.s2forum.com/forum/showthread.php?t=80796]

                        Comment


                        • #13
                          about the cables
                          think the thick white and brown cable is from rear window defroster
                          red/blue maybe from trunk light? (probably + battery)
                          is that a black/green cable? maybe from number plate lights?
                          all the brown cables or ground
                          i'm not sure this is all correct
                          audi coupe quattro b2 2.2 20vt project (573hp-626nm)
                          TWINCHARGED power,zero lag
                          AEM W/M injection

                          Comment


                          • #14
                            Originally posted by quattro-nick View Post
                            about the cables
                            think the thick white and brown cable is from rear window defroster
                            red/blue maybe from trunk light? (probably + battery)
                            is that a black/green cable? maybe from number plate lights?
                            all the brown cables or ground
                            i'm not sure this is all correct

                            Hello

                            I dont think its from the defroster because those cables i know where are and they go to the window allready. And they are pretty Long those cables the ones that is cutted they have not been connected to anywhere so i guess they are not that important thanks for answer
                            Project Audi s2 coupé 1996

                            http://http://www.s2forum.com/forum/showthread.php?t=80796]

                            Comment


                            • #15
                              Aloha people

                              was looking at new wheel bearing housing and found this

                              893505436B wheel bearing housing;right costs on Audi Tradition 225,49 EUR

                              893505436C wheel bearing housing; right costs on audi tradition 421,26 EUR

                              the only diffrent (when i searched on partbase.org) was that PN 436B WAS TO YEAR -1995
                              AND THE 436C was to year 1996 .... and my car is a -96

                              Can anyone tell me if it is a diffrent between theese housings or? 200€ diffrent and of course it's the right side i need...
                              Project Audi s2 coupé 1996

                              http://http://www.s2forum.com/forum/showthread.php?t=80796]

                              Comment

                              Working...
                              X