S2 Avant -93

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Antsa
    S2Forum Maniac
    • Nov 2016
    • 626
    • Country: Finland

    #436
    The backbox was welded today. Doesn't look pretty but should work. Took me best part of todays garage time to weld it. But I think the tips now sit nicely. Tomorrow last day of my holiday and hopefully I can finish the part between cat and silencers. Wastegate to downpipe has to be done later.



    20261119_140623.jpg


    20261119_140834.jpg



    20261119_140855.jpg



    Comment

    • RedV6
      S2Forum Fanatic
      • Jun 2026
      • 94
      • Country: Scotland

      #437
      Those tail outlets look just right. Top job.

      Comment

      • struikie
        S2Forum Addict
        • May 2019
        • 319
        • Country: Netherlands

        #438
        Ahhh you have a standard bumper. The exhaust sits just fine with the RS2 and S2/Competition bumper.
        I had it sit very low with the standard bumper as well.



        JW
        | project | 1993 Audi 80 VR6 turbo quattro |
        | daily | 2018 BMW G31 530d | 345bhp 770Nm |

        Comment

        • Filip_FIN
          S2Forum Addict
          • Feb 2016
          • 343
          • Country: Finland

          #439
          Hyvältä näyttää , again great work ??
          Project Audi s2 coupé 1996

          http://http://www.s2forum.com/forum/showthread.php?t=80796]

          Comment

          • Antsa
            S2Forum Maniac
            • Nov 2016
            • 626
            • Country: Finland

            #440
            Originally posted by struikie
            Ahhh you have a standard bumper. The exhaust sits just fine with the RS2 and S2/Competition bumper.
            I had it sit very low with the standard bumper as well.

            JW
            That's interesting, since I've always thought I should have an S2 rear bumper Can you share info on standard and S2 bumper differences?

            Comment

            • Antsa
              S2Forum Maniac
              • Nov 2016
              • 626
              • Country: Finland

              #441
              The exhaust is now fully tacked together. Except the middle v-band because I ran out of gas today. After I get a new bottle of argon I can tack it together, verify one last time everything is as should be and then I can fully weld the exhaust.

              I made it too complicated trying to get the cat as close to engine as possible and also as high as possible. Now there are too many bends in the pipe that complicates the exhaust without any gains. I'll have to do better next time, but at least it's now nearly finished


              20261120_132828.jpg


              20261120_132725.jpg

              Comment

              • struikie
                S2Forum Addict
                • May 2019
                • 319
                • Country: Netherlands

                #442
                S2 / Competition rear bumper.
                Only a black lower section.


                Standard rear bumper has the 3 part black middle part.


                Looks like you have a fully painted standard bumper, which has the exhaust cut out sit higher.
                The S2 and RS2 bumpers go lower.

                JW
                | project | 1993 Audi 80 VR6 turbo quattro |
                | daily | 2018 BMW G31 530d | 345bhp 770Nm |

                Comment

                • Antsa
                  S2Forum Maniac
                  • Nov 2016
                  • 626
                  • Country: Finland

                  #443
                  Thanks for the pictures, now it's very clear that I indeed have a standard bumper. Maybe I have add an S2 bumper to the shopping list

                  Comment

                  Working...