Got to love those chinese tig torches. Ziptied together.
-
Everything less than 2 bar is considered to be naturally aspirated -
One good thing is that you can move/turn the button easily if you wan't to hold the torch differently, e.g. like a pen.
Audi UrS4 Avant 2.5 20vt - twincharged - Project
Audi 80q B4 Sedan 2.2 20vt - Daily user
BMW 320d Touring e91 M-Sport - Daily user
BMW 740iA e38 - ProjectComment
-
Next time you chat with Luisu, remember to tell him
Suspension parts ordered. Front arm kit, AKmotorsport bushing front kit and if i finally get proper rear shock absorbers sometimes soon from demontweeks. There was a shipping mistake made at spax, i got four front coilovers instead of front + rear kit.
I think i should also replace steering rack and steering damper, because i think they are original and 400k on the clock.Comment
-
Actually i might choose gtw6265r with 0.96 housing. Dunno yet.
After 7 weeks from the first reclamation e-mail, i got these correct spax rear struts. Now i can assemble rear end...
Comment
-
Rear end assembled as much i have parts.
Front end also test assembled to see if something is missing.
Front brake setup is figured out, rear brakes still a question mark. Anyway brakes have to fit in 17" wheels.
Comment
-
Front brake setup acquired. 4 piston brembos with 323x30 discs.
Also FAG front bearings arrived so i pressed hubs on and bolted bearings on. Also some fresh powdercoated parts.
Junkpile under a junkpile.
Comment
-
Acquired new stuff, after a month of slow build period. Maybe it is time to boost it up.
Garrett GTW3884 0.96 T4 from finturbo and 335x22 rear brake discs made by mintex.
Comment
-
that's a big turbo
power range around 800hp-900hp?audi coupe quattro b2 2.2 20vt project (573hp-626nm)
TWINCHARGED power,zero lag
AEM W/M injectionComment
-
With that hotside, maybe 750-800hp ish.Comment
-
Had a issue with vband, but nothing that lathe won't solve.
Finally after a months or so, car got on wheels and moved to a lift for weekend.
We managed to fit turbo in proper position and started to fabricate downpipe. Dat piecut action
Comment
-
Exhaust manifold, and downpipe progress. 4" dp fits like a glove.
Comment
Comment