Coupe seatbelt - Right side

[recurveandy]

Hello all

Looking for a right hand coupe seatbelt please
895857706
Non procon-ten

[newsh]

It’s not hard to change the belt over if you can get hold of a decent LH one

Only works if it’s the belt that’s frayed though!

Or if it’s lazy, take the belt out and wash it, then add a few more turns to the retractor before threading it back in

[recurveandy]

Fitted some A/S6 seats to the B2
The buckles are different and as they haven't height adjust, so I can't swap them them over
Had a L/H in spares but couldn't find the right

The B3 coupe belts are mounted gubbins side out normally, so need to be turned round and swapped sides to fit the B2
Normally you shouldn't swap sides due to the ball bearing inside the mechanism won't lock up, or something like that

[newsh]

Yes, you mustn’t swap the reel over or it won’t lock when you decelerate.
You can take the belts off though and turn them round or wash them and tighten the reel up so they retract quicker.

[newsh]

I understand what you’re doing now. Why not fit the B3 belt to the B2 reel?

[recurveandy]

I tried *******ising an A3 belt but the spiral spring flung itself across the workshop, nearly took my fingers off
Now managed to source the correct belt so should be all good