I need a RS2 or S2 crossmember

[HONDATUNING776]

If anyone has one let me know. It would be even better if you were located in the United States but doesn’t matter too much. Would prefer one that doesn’t leak lol.

Thanks,

Caleb


Sent from my iPhone using Tapatalk

[Rikki Kitto]

They have a slight difference RS2 has a wider intercooler so mounting points are wider

[HONDATUNING776]

They have a slight difference RS2 has a wider intercooler so mounting points are wider

Ok. I have an intercooler right now. It’s this one. https://www.wagner-tuning.com/produc...200001012.html


Sent from my iPhone using Tapatalk

[Rikki Kitto]

Notice the * after S2 in the description it says *) in combination with surrounded RS2 parts. You need an RS2 cross member or you will have to adjust the bracket width if you buy an S2 type

[orignalS60]

I need an s2 crossmember as well.

[HONDATUNING776]

I need an s2 crossmember as well.

Oh man now there two of us. Who’s going to get it first....hmmmm


Sent from my iPhone using Tapatalk

[HONDATUNING776]

Notice the * after S2 in the description it says *) in combination with surrounded RS2 parts. You need an RS2 cross member or you will have to adjust the bracket width if you buy an S2 type

Ok thanks for explaining that.


Sent from my iPhone using Tapatalk

[Rikki Kitto]

It's easy enough to change an S2 type just cut the bracket off and weld back to fit your IC I though wagner did the cross members too

[david1980]

Just do like has been shown in the other thread and make one with some bar section, you will free up more space if you do it right like what newsh has shown already.