RS2 rear wheel bearings

[Rikki Kitto]

Need a source and a part number if anyone can help, my S2 has RS2 hubs etc so finding parts can be tricky

[Tractor Dave]

82mm same as S2 Avant. Get them direct from SKF to avoid counterfeit ones.

https://vehicleaftermarket.skf.com/uk/en/find-parts?market=eu&l=en&vhits=12&phits=10&category=Wheel%2Bend%2Bproducts%257CWheel%2Bend%2Bproducts&subcategory=Wheel%2Bbearing&vehicleid=eu0002-4665&tab=tab_1_automotive

[Rikki Kitto]

Cheers bud thought you might know this, only one has gone but gonna do both

[Rikki Kitto]

Do you know the part number I'm confused

[Tractor Dave]

Do you know the part number I'm confused

7zap is dead so I don't know the part number. If you go on the SKF website you can search under your registration. I did a manual search entering 1995 RS2 to get the link above.

[B5NUT]

Part number of the rear wheel bearing and it's still available at a silly £136 from Audi


Screenshot 2023-02-25 154439.jpg

[Rikki Kitto]

Problem is I have a Coupe with RS2 hubs so Reg won't work

[Rikki Kitto]

Any RS2 owners let me use their Reg to find it

[B5NUT]

Think this is the RS2 press car
press car.jpg

[Tractor Dave]

While we are talking about wheel bearings, Euro Car Parts have made a price error on 75mm rear coupe bearings and they are £3.69 each for the Q drive brand. Not a great brand but worth getting a couple as spares. The also fit the TQS rear.

[Rikki Kitto]

https://vehicleaftermarket.skf.com/uk/en/find-parts?market=eu&l=en&vhits=12&phits=10&category=Wheel%2Bend%2Bproducts%257CWheel%2Bend%2Bproducts&subcategory=Wheel%2Bbearing&tab=tab_1_automotive&vehicleid=eu0002-4665

Is this what I need? I thought front and rear had differences I need rears

[Tractor Dave]

Ok. Confusion here.
You have RS2 hubs. Hub carriers must be coupe as carriers on RS2 are completely different and would not work on a coupe. So what you need is 75mm outer and inner to match the RS2 hub spindle. Am I correct? If that is the case I think you will need to pull one and check the part number. I think it will be same as rear B5 Quattro as it has 75mm outer and inner same as S2 Avant but you best check.
s2 Avant has 82mm front and rear. Coupe has 82mm front and 75 rear.


Sent from my iPhone using Tapatalk

[pfi]

Problem is I have a Coupe with RS2 hubs so Reg won't work

Rear Coupe with RS2 hubs, how did You do that ?
Coupe has 75mm bearings, RS2 has 82mm ...
pics ?

[Rikki Kitto]

Hi the car had an RS2 conversion when I bought it apart from the engine which I've done since I've had it

[Rikki Kitto]

Must a mix of coupe and RS2 bits as my wheels have the 5×130 porsche spacing, remember the front bearings are strange with different diameters half way in or am I going mad