RS2 rear wheel bearings

[Rikki Kitto]

[Rikki Kitto]

!!!help me please!!!

[Rikki Kitto]

Part number of the rear wheel bearing and it's still available at a silly £136 from Audi


Screenshot 2023-02-25 154439.jpg

NLA since 2021

[pfi]

OK bearings for front are 82mm/ 45mm/43mm
Rear 75mm/ 41mm/39mm

so defo RS2 front and rear

RS2 (and s2 Avant/Sedan (B4)) uses 82mm bearings front and rear.
std RS2 rear hub doesn't fit in a 75mm so must have been machined.
but, if You've measured rear to be 41/39 You may use a std s2 (coupe) rear 75mm bearing
In front You can use a std s2 (front) 82mm bearing

Original bearings part# may be NLA but plenty of alternatives out there ...

[rxl]

rs2 uses SKF VKBA1356 wheel bearing. dont know how your rear hubs are maschined or just the hub itself comes from another car. best option to order 2 coupe ones and 2 rs2 ones. one of those will fit and another you can return.

[pfi]

Search for alternatives to VKBA 1356 :
443498625A / 4A0498625 / 4D0407625E / 893498625E / 1D0498625B / 443498625F / 4B0498625A / 893498625C / 8D0498625B

[B5NUT]

NLA since 2021

Thats very strange ETKA still lists them as a valid part
Screenshot .jpg


A quick search on that part number on ebay and there are a few new old stock "Genuine Audi" bearing listed.

[rxl]

Dont over pay I used the same ones as abive for my rs2

[Rikki Kitto]

Thanks guys must be the TPS guy not been arsed to look it up properly

[K Simmonds]

Thanks guys must be the TPS guy not been arsed to look it up properly

As I've mentioned to you in the past it's hit and miss who you get at our local TPS, there's two old members of staff who are super helpful and will get you a part if available even if it means going on back order from Germany...

Where as there's also there complete moron who seem to be incapabable of finding anything for a car older than B6, it's alsmost like they simply can't be bothered to put stuff on a back order.

Jim got a full set of brand spanking new lower Coupe door trims after a long chat with Simon, who's probably the most helpful member of staff, he had to wait a month for them but the full set set cost less than £250.

I still have a set of Coupe door cards for you, I could end send them in a consignment of two packages for less than £40 now Parcelforce have dropped their prices again.

[Rikki Kitto]

cheers bro I will defo get over t see ya one day as long as you OK storing them I've ordered the front bearings off eBay has anyone got part numbers for the rear ones

[K Simmonds]

That fine mate, they don't take up a lot of room and aren't in the way.

[Rikki Kitto]

Some pics of rear thingy

[rxl]

and did they fit`?

[Rikki Kitto]

Not tried yet spanner man doin it soon