WTD: Fluro lined hose

[s2driveruk]

Replacing the PCV hoses with a Newsh special Tpiece and before I go and buy 1m lengths of hose, thought I'd check here if anyone has some excess to sell instead from an old project etc.

I need:

8mm ID
20mm ID
30mm ID

ID - internal diameter

It needs to be oil/fuel grade rubber or silicone hose not standard as it perishes.

Let me know what you got

Cheers
David

[s2_bo]

Fluro lined hose is OTT for PCV hoses.

I have had a silicone set fitted thats not lined and its been fine for 3 years...

Save your money as its very expensive stuff.

[s2driveruk]

Cheers Bo thats good feedback, i was under the impression it was knackered long before that kind of usage.....like it when i can save money

Gentlemen...this thread is closed

[s2_bo]

The only thing i have found is that blue discolours after a few years, maybe from the oil, so if i do it again i would get black hose..

[s2driveruk]

just bought 3 lots of blue hose to match the vac lines I have nevermind, was cheap enough not to need to worry about it.

[s2_bo]

If you need elbows for the hose connection then copper plumbing joins make great cheap alternatives to the expensive alloy or stainless steel ones.

[Jamo]

Use rubber hoses, oil kills silicone the plys come apart.

[s2driveruk]

dont worry i'm going to be keeping a close eye on longevity of blue silicone having just ordered it all...having said that, the extra cost of fluro lined silcone is so extreme they can discolour and fail a few times before it would meet the costs of that stuff

[newsh]

If you want a short bit of fluor for the 30mm to the T piece I've got some, its one kidney per foot


Seriously though, you only need 50mm for this and the heat and oil will kill the silicon, it goes all brown and floppy (oo er)

[s2driveruk]

just extracted the kidney John...where shall i send it lol

Drop me a pm with the details and in the meantime I'll pack it in ice

[Rusty]

A little late but I use aeroquip oil hose, it's speifically designed for oily bits