Clutch Master Cylinder for Urq RR

[Knight Rider S4]

As above on the hunt for a Clutch master cylinder for my RR , was hoping it was going to be the same as S2 but different

If you have one give us a shout


Cheers


Steve

[Reno]

Ask Pete at Quattro Corner, got mine from him not that long ago and not a bad price either.

[Val]

The same as typ85, according to Etka.
http://cgi.ebay.com/ws/eBayISAPI.dll...m=110513297547

857721401A - LHD
478721171 - RHD

[steverrquattro]

As above on the hunt for a Clutch master cylinder for my RR , was hoping it was going to be the same as S2 but different

If you have one give us a shout


Cheers


Steve

It's the same as a Porsche 944 S2. I got mine from GSF for just under £60.00.

Oh and if you haven't done one before, it's a really sh*t job. Just take your time.

A quick tip as well, when you're putting the clevis pins and clips back in, I always tie a bit of fishing line on them as quite often you can drop them and they fall behind the carpet which is a nightmare to get them out.

Here's a link to the procedure, although I find leaving the steering wheel on helps when getting in and out of the car.

PS It might be worth doing the slave at the same time if it hasn't been done already.

http://www.isham-research.co.uk/quattro/clutch-master-cylinder.html

[Knight Rider S4]

It's the same as a Porsche 944 S2. I got mine from GSF for just under £60.00.

Oh and if you haven't done one before, it's a really sh*t job. Just take your time.

A quick tip as well, when you're putting the clevis pins and clips back in, I always tie a bit of fishing line on them as quite often you can drop them and they fall behind the carpet which is a nightmare to get them out.

Here's a link to the procedure, although I find leaving the steering wheel on helps when getting in and out of the car.

PS It might be worth doing the slave at the same time if it hasn't been done already.

http://www.isham-research.co.uk/quat...-cylinder.html

Cheers for the tips Steve

Have it all apart already ..pedal box sitting on the bench ..left steering wheel on and just dissconnected at pedal box( inbetween rod)

I have replaced the slave cylinder so was just finishing up with MC ..piston was siezed in old one ,spring had no affect to it what so ever..



Found this link which I thought was pretty good but cutting the top off to access the MC was extreme

http://www.kvquattro.com/13may2006.html